X3_X4_Series machine.pdf - 第429页

User manual SIPLAC E X-Series 7 Station extensions Software Version SR.601.xx 11/2005 US Edition 7.10 Feeder module cover flap (S feeder module) 429 7.10 Fe eder module cover flap (S feeder module) Item no. 001 196 10-xx…

100%1 / 464
7 Station extensions User manual SIPLACE X-Series
7.9 Magnetic pin support Software Version SR.601.xx 11/2005 US Edition
428
7.9 Magnetic pin support
Item no. 00119680-xx
Wide boards tend to deflect during placement such that, under certain circumstances, the compo-
nents can no longer be placed with the desired accuracy. Highly curved PCBs also affect the
placement accuracy. This problem can be easily rectified by fitting magnetic pin supports on the
lifting table.
7
Fig. 7.9 - 1 Magnetic pin support
User manual SIPLACE X-Series 7 Station extensions
Software Version SR.601.xx 11/2005 US Edition 7.10 Feeder module cover flap (S feeder module)
429
7.10 Feeder module cover flap (S feeder module)
Item no. 00119610-xx Feeder module cover flap HF 2/4 for locations 2 or 4
Item no. 00119633-xx Feeder module cover flap HF 1/3 for locations 1 or 3
The feeder module cover flap is installed over the component feeder area. It is designed to prevent
a head crash with an upright feeder module retainer that has not been engaged correctly. The
feeder module cover flap can also prevent the front panel of feeder modules entering the place-
ment head traveling range due to incorrect operation.
7
Fig. 7.10 - 1 Feeder module cover flap for locations 1 and 3
(1) Feeder module cover flap
(2) Mechanical lock
(3) Switch in the emergency stop circuit
The switch for the feeder module cover flap is looped into the emergency stop circuit. The feeder
module cover flap must be locked mechanically, which causes the switch to close the open emer-
gency stop circuit.
7 Station extensions User manual SIPLACE X-Series
7.11 Component sensor for the C&P12 head Software Version SR.601.xx 11/2005 US Edition
430
7.11 Component sensor for the C&P12 head
Item no. 00118021-xx
7
Fig. 7.11 - 1 12-segment Collect&Place head with component sensor
(1) 12-segment Collect&Place head
(2) Component sensor