X3_X4_Series machine.pdf - 第277页
User manual SIPLAC E X-Series 5 Tasks on the machine Software Vers ion SR.601.xx 11/ 2005 US Ed ition 5.10 Dock ing the component trolley in or out 277 5.10.3 Safety instructions f o r moving the component troll ey W ARN…
5 Tasks on the machine User manual SIPLACE X-Series
5.10 Docking the component trolley in or out Software Version SR.601.xx 11/2005 US Edition
276
The safety concept for the component trolley change requires the operator to press a button (item
1, 2, 3 or 4 in Fig 5.10 - 1
) on the input or output side of the machine in order to dock the compo-
nent trolley in or out. This ensures that the operator is always standing to the side of the placement
machine. In addition, the component trolley can only be docked in if the protective covers are
closed.
5.10.2 Docking out the component trolley
Æ Click on the STOP PROCESSING PCB icon in the MAIN VIEW menu.
The PCB in progress will be completed. The icons of the SINGLE FUNCTIONS menu will
then be activated. 5
Æ Click on the desired icon SINGLE FUNCTIONS GANTRY.
Æ Select GANTRY FUNCTIONS.
Æ From this menu, click on the GO TO SET-UP POSITION button.
All the placement heads will move across the PCB conveyor to prevent them being damaged
when the component trolley is changed. 5
Æ Press the relevant button on the input or output side of the machine (item 1, 2, 3 or 4 in Fig.
5.10 - 1
) until the trolley is docked out fully.
Æ Swivel the two handles up (item 1 in Fig. 5.10 - 2).
5
Fig. 5.10 - 2 Component trolley - swivel handles up to push
5
Æ With both hands on the handles, pull the component trolley out of the placement machine.
User manual SIPLACE X-Series 5 Tasks on the machine
Software Version SR.601.xx 11/2005 US Edition 5.10 Docking the component trolley in or out
277
5.10.3 Safety instructions for moving the component trolley
WARNING 5
To prevent accidents, ALWAYS follow the rules listed below when you move the component trol-
ley.
Æ Always hold the handles with both hands when you want to move the component trolley.
Æ Remember that a component trolley with the full complement of feeder modules can tip over
sideways or forward on gradients of 20° or more.
Æ Make sure that the surface on which the trolley is moved has a significantly smaller gradient.
Æ Be careful not to collide with obstacles. The trolley could tip forward if it is traveling fast
enough.
5 Tasks on the machine User manual SIPLACE X-Series
5.10 Docking the component trolley in or out Software Version SR.601.xx 11/2005 US Edition
278
5.10.4 Docking the X-series component trolley
CAUTION 5
The component trolleys for the SIPLACE X-series (Fig. 5.10 - 3
) and SIPLACE HF (Fig. 5.10 - 6,
page 281
) have different docking units. Each component trolley must therefore only be docked
into the correct docking unit. Be careful when you push component trolleys for the SIPLACE X-
series into the machine and make sure that the locking latches (item 3 in Fig. 5.10 - 3
) do not
bump into obstacles.
5
Fig. 5.10 - 3 Component trolley and component trolley docking unit, SIPLACE X-series
(1) Component trolley docking unit, SIPLACE X-series
(2) Component trolley, SIPLACE X-series
(3) Locking latches