X3_X4_Series machine.pdf - 第381页

User manual SIPLAC E X-Series 7 Station extensions Software Vers ion SR.601.xx 11/ 2005 US Ed ition 7.1 Nozzle changer 381 7.1.1.10 "Row 2" nozzle changers for the 20- segment Collect&Place head Item no. 00…

100%1 / 464
7 Station extensions User manual SIPLACE X-Series
7.1 Nozzle changer Software Version SR.601.xx 11/2005 US Edition
380
PLEASE NOTE 7
– Move the locking plate into the "Magazine locked" position.
– Before inserting, align the magazine so that the centering pins (item 2 and 6 in Fig. 7.1 - 7
)
slide into the centering holes and slot (item 6 in Fig. 7.1 - 6).
Æ Place the magazine on the snap fastener balls (item 5 in Fig. 7.1 - 7).
Æ Press the magazine down evenly so that the snap fastener balls engage in all the snap fas-
teners at the same time.
7.1.1.9 Position detection
Each magazine of the nozzle changer has two fiducials: one for determining the position and one
for determining the angular position.
7
Fig. 7.1 - 8 Nozzle magazine - holder numbering, fiducials for determining the position and angular position
(1) Locking plate in the "Magazine open" position
(2) Fiducial for determining the position
(3) Fiducial for determining the angular position
User manual SIPLACE X-Series 7 Station extensions
Software Version SR.601.xx 11/2005 US Edition 7.1 Nozzle changer
381
7.1.1.10 "Row 2" nozzle changers for the 20-segment Collect&Place head
Item no. 00119716-xx
The "row 2" nozzle changer may be installed at the following locations:
X4 placement machine: Locations 1, 2, 3 and 4 (see Fig. 7.1 - 2
, page 372)
X3 placement machine: Locations 1, 3 and 4 (see Fig. 7.1 - 3
, page 373)
X2 placement machine: Locations 1 and 3 (see Fig. 7.1 - 4
, page 374)
The retrofit package contains an assembly kit.
7
Fig. 7.1 - 9 Assembly kit for the "row 2" nozzle changer
7
7
7 Station extensions User manual SIPLACE X-Series
7.1 Nozzle changer Software Version SR.601.xx 11/2005 US Edition
382
7.1.2 Nozzle changer for the 12-segment Collect&Place head
Item no. 00119661-xx
This nozzle changer can hold up to 5 magazines, each with 12 nozzle holders. The magazines
are seated on a common support. They are centered using two parallel pins and fixed in place with
clips.
7
Fig. 7.1 - 10 Nozzle changer for the 12-segment Collect&Place head
WARNING 7
Only install the associated nozzle changer for each placement head. There is a risk of head
crashes with mixed configurations.