X3_X4_Series machine.pdf - 第370页
6 Component handling User manual SIPLACE X-Series 6.10 Matrix tray changer Software Version S R.601.xx 11/2005 US Edition 370
User manual SIPLACE X-Series 6 Component handling
Software Version SR.601.xx 11/2005 US Edition 6.10 Matrix tray changer
369
6.10.2.2 Electrical ratings
6
6.10.2.3 Noise emissions
6
6.10.2.4 Permitted environmental factors
6
Supply voltage
3 x 400 VAC, 50 Hz (Europe)
3 x 208 VAC, 60 Hz (USA)
Total power 1.5 kW
Rated current
2.7 A at 3 x 400 VAC
4.2 A at 3 x 208 VAC
Fuses 3 x 16 A
Rated power consumption of the largest consumer 2 A
Max. noise emissions 74 dB (A)
Room temperature Between 15 °C and 35 °C
Atmospheric humidity
30 - 75 %
(No higher than 45% on average to prevent any
possibility of condensation on the machine)
6 Component handling User manual SIPLACE X-Series
6.10 Matrix tray changer Software Version SR.601.xx 11/2005 US Edition
370
User manual SIPLACE X-Series 7 Station extensions
Software Version SR.601.xx 11/2005 US Edition 7.1 Nozzle changer
371
7 Station extensions
7.1 Nozzle changer
Nozzle changers can greatly increase the flexibility of the placement heads for processing differ-
ent types of component. If the placement program requires a nozzle change, then the placement
head automatically returns the old nozzle to the nozzle holder and picks up the new nozzle. Noz-
zles that were separated out during the vacuum check can also be quickly changed.
It is significantly more exact and faster to pick up nozzles from a nozzle changer than would be
possible manually. When placing small components, it is essential to minimize the radial eccen-
tricity during nozzle rotation.
7.1.1 Nozzle changer for the 20-segment Collect&Place head
Item no. 00119715-xx
7
Fig. 7.1 - 1 Nozzle changer for the 20-segment Collect&Place head