X3_X4_Series machine.pdf - 第293页
User manual SIPLAC E X-Series 6 Component han dling Software Version SR.601.xx 11/2005 US Edition 6.1 X feeder modules for the component trolley from the SIPLACE X- series 293 6.1.2 T echnical dat a for the SI PLACE X-se…
6 Component handling User manual SIPLACE X-Series
6.1 X feeder modules for the component trolley from the SIPLACE X-series Software Version SR.601.xx 11/2005 US Edition
292
6
Fig. 6.1 - 4 Operator panel of the X feeder module
(1) Operator panel of the X feeder module
(2) LCD display
In the basic setting, the track number and conveyor increment are displayed.
(3) "FORWARD" button
(4) "BACK" button
(5) "FOIL" button
(6) "SET" button
(7) Multicolor status display
green → Standby
orange → Warning
red → Error
off → Feeder module not contained in the set-up
6
PLEASE NOTE 6
The machine controller switches off the status display of any feeder modules not included in the
set-up. The "LED off" status only occurs when the programming system has preset a job on the
line. This takes some of the work away from the operator since he only has to watch those feeder
modules that are contained in the set-up.
For the actual set-up process - no set-up information at the station, no job sent from SIPLACE
Pro to the station/line - the LED on each feeder module is activated after the set-up has been
made. The operator is thus informed whether everything is OK.
6
User manual SIPLACE X-Series 6 Component handling
Software Version SR.601.xx 11/2005 US Edition 6.1 X feeder modules for the component trolley from the SIPLACE X-series
293
6.1.2 Technical data for the SIPLACE X-series feeder modules
The following pages contain pictures of the X-series feeder modules and the technical data.
6.1.2.1 8 mm X tape feeder module
6
Fig. 6.1 - 5 8 mm X tape feeder module
6
8 mm X tape feeder module Item no. 00141270-xx
8 mm X tape feeder module with splice sensor Item no. 00141290-xx
Width 10.8 mm
Feeder module locations filled 1
Conveyor increment 1 mm / 2 mm / 4 mm / 8 mm
Changeover time for the component tape < 45 s
Changeover time for the pre-set feeder module
on the machine
< 15 s
6 Component handling User manual SIPLACE X-Series
6.1 X feeder modules for the component trolley from the SIPLACE X-series Software Version SR.601.xx 11/2005 US Edition
294
6.1.2.2 12 mm X tape feeder module
6
Fig. 6.1 - 6 12 mm X tape feeder module
6
6
6
6
6
12 mm X tape feeder module Item no. 00141271-xx
12 mm X tape feeder module with splice sensor Item no. 00141291-xx
Width 22.6 mm
Feeder module locations filled 2
Conveyor increment From 4 mm to 16 mm in 4 mm increments
Changeover time for the component tape < 45 s
Changeover time for the pre-set feeder module
on the machine
< 15 s