00194307-01_SAHF_Intern_1203_ENG.pdf - 第10页
2 Safe ty What to do Be fore Starting Servicing Wor k... SIPLACE HF Safety Instruction s for Working with S trong Magne tic Fields 2-4 0019 4307- 01 Iss ue 12/2 003 Copyr igh t © 2 003 S ie mens D em atic SD EA 1 WARNING…
SIPLACE HF
Safety Instructions for Working with Strong Magnetic Fields
Safety
What to do Before Starting Servicing Work...
2
Copyright © 2003 Siemens Dematic SDEA 1 00194307-01 Issue 12/2003 2-3
1
3
2
Turn the operating lever (1) counterclockwise.
Use the screwdriver to push the locking lug (2) out of the
operating lever (1).
Secure the operating lever with a padlock (3).
Alternatively: Attach warning signs.
If a machine can be locked, it must be. However, there are situations where energy isolating devices can not
accommodate locks. In these cases, the energy isolating devices must be tagged to warn employees that the machine is
de-energized for servicing. The tag must be securely fastened, it must be placed in a position visible to all and it may only
be removed by the person who attached it.
2
Safety
What to do Before Starting Servicing Work...
SIPLACE HF
Safety Instructions for Working with Strong Magnetic Fields
2-4
00194307-01 Issue 12/2003 Copyright © 2003 Siemens Dematic SDEA 1
WARNING
To avoid damaging the collect+place head, ALWAYS observe the following points when moving the gantry:
NEVER move the gantry by pushing with your hands against the collect+place head.
NEVER push the gantry while the Z-axis is lowered.
ALWAYS take hold of the X-axis base with your hands to move the gantry.
SIPLACE HF
Replacing the Gantry [03006781-xx]
Service
Gantries
3
Copyright © 2003 Siemens Dematic SDEA 1 00194307-01 Issue 12/2003 3-1
3 Service Work
DANGER
Please observe the safety instructions in the Operating Manual for all service work!
See
What to do Before Starting Servicing Work...:
Page 2-2
3.1 Gantries
See
Safety Instructions for Working with Strong Magnetic Fields:
Page 2-1
3.1.1 Replacing the Gantry [03006781-xx]
Tools
Special torque wrench
Preparation
Depending upon the configuration of the machine, you will need to remove the relevant modules, covers and cover plates
before you can dismantle the gantry.