00194307-01_SAHF_Intern_1203_ENG.pdf - 第35页
SIPLACE HF Replacing the X -Drive (Prima ry) [00375245 -xx] Serv ice Gan tri es 3 Copy ri ght © 2 00 3 S iem ens D emat ic SDEA 1 0019 4307- 01 Iss ue 12/2 003 3-25 1 3 2 Undo the 4 screws fas tening t he PC B camer a …
3
Service
Gantries
SIPLACE HF
Replacing the X-Drive (Primary) [00375245-xx]
3-24
00194307-01 Issue 12/2003 Copyright © 2003 Siemens Dematic SDEA 1
2
1
Unplug the proximity switch cable (2) and pull it forwards, out of
the head mount.
Undo the 8 screws (4 x at front/ 4x at back) fastening the x-
mount (1) and pull these up and out, together with the trailing
cable.
Fasten the x-mount at a suitable point.
CAUTION
Make sure that the flat ribbon cable and the pneumatic hoses are not
rubbed against any parts or kinked. Watch out for sharp edges.
SIPLACE HF
Replacing the X-Drive (Primary) [00375245-xx]
Service
Gantries
3
Copyright © 2003 Siemens Dematic SDEA 1 00194307-01 Issue 12/2003 3-25
1
3
2
Undo the 4 screws fastening the PCB camera mount (1).
Remove the complete unit, including PCB camera (3) and
damping bracket (2).
Fasten the mount to a suitable part of the machine frame. Take
care not to damage the camera.
3
Service
Gantries
SIPLACE HF
Replacing the X-Drive (Primary) [00375245-xx]
3-26
00194307-01 Issue 12/2003 Copyright © 2003 Siemens Dematic SDEA 1
1
2
2
1
2
1. Insert the forcing screws
2. Locking screw M4x60
Screw 1 forcing screw (1) into each side, tightening until it
reaches the plate.
Remove one fastening screw (2) from each of the 4 sides.
Replace the fastening screw with a M4x60 locking screw. The
motor has now been secured against falling.