YSP10_Mainte_E.pdf - 第10页
2. Label positions vii Safety instructions █ Label positions ■ Machine side cover ■ Conveyor opening ■ Conveyor cover ■ Rear lower cover W arning/caution labels Rear side of YSP10 with extension conveyor of exit side (op…
2. Label positions
vii
Safety instructions
█
Label positions
■ Machine side cover
■ Conveyor opening
■ Conveyor cover
■ Rear lower cover
Warning/caution labels
Rear side of YSP10 with extension conveyor of exit side (option)
93012-KMJ-00
Injury from touching moving parts during machine operation
• Hands or ngers might be caught between moving parts
and covers, causing injury.
• Hands or ngers might be pinched by moving parts,
causing injury.
Do not operate machine with the cover detached.
Never place hands or fingers in machine during operation
such as when handling tray magazines.
Electrical shock hazard
Do not touch power supply inside cover.
3. Safety
viii
Safety instructions
3. Safety
To ensure that the machine you purchased is used safely and correctly, always comply with the
instructions and rules in this manual regarding safety. However this manual cannot cover all items
regarding safety in detail. So it is extremely important that the operator or person handling the machine
make correct decisions regarding safety.
3.1 To ensure safety
To maintain the safety of the operator or person working with this machine, it is essential that it (including
external parts feeders) be installed correctly in compliance with the safety standards and conditions of that
country.
Complying with the safety regulations and laws of that country is the responsibility of the customer who
purchased this machine. The supervisor of this machine must take responsibility to ensure all measures have
been taken for machine safety.
3.1.1 Defining safety
1. Safety has priority over all other operations.
2. Safety is more important than any other task.
3. Safety is the foundation for work efficiency.
4. Safety begins with maintaining (keeping it neat and orderly) the work environment.
3.1.2 Causes of injuries and accidents
Most accidents are not something that occurs but something that are caused. So it is important to make an
effort NOT to cause accidents.
█
Hazardous actions
• Ignoring causes of accidents
• Working or operating equipment in cramped locations
• Working in locations or positions where safety cannot be ensured
• Unsafe machine operation and using equipment whose safety cannot be ensured
• Working or operating equipment at speeds where safety cannot be ensured
• Working or operating machines with safety equipment removed
• Performing work or tasks on top of a machine currently in operation
• Playing around or goofing off during work
• Performing maintenance or inspections without wearing safety gear