YSP10_Mainte_E.pdf - 第103页
Chapt er 5 Lubric at ion point s and s chedule Contents 1. Lubrication to ols and grease 5-1 1. 1 Compat ible grease 5-1 1.2 Grease gun 5-1 2. Lubric ation point s 5-2 2.1 Prin ting hea d unit 5-2 2.1.1 SY - ax i s 5- 2 …
4. Mask vacuum unit
4-13
Chapter 4 The parts to be replaced and its procedures
4. Mask vacuum unit
This section describes the procedures for cleaning and replacing the mask vacuum filter of YSP10.
4.1 Cleaning and replacing the mask vacuum filter
e
1
Open the lower door.
1. Press the emergency stop button to open the
safety cover.
2. Open the lower door.
2
Remove the lter unit by detaching the
duct cover and pulling out the air hose
from the lter unit.
3
Take out the lter from the lter unit.
1. Slide the rotation stopper to arrow direction
to unlock.
2. Rotate the cover to counterclockwise 90
degrees or more.
3. Pull out the cover from the case to take out
the filter element.
4
Blow to clean the taken out lter inside
and outside with air blow tool.
n
NOTE
If dust cannot be removed or the filter has worn out,
replace the filter with a new one (KGR-M4995-F0X,
FILTER, SPACE).
5
Attach the lter to lter unit.
1. Attach the cleaned or new filter to the cap
to insert into the case.
2. Align the projection of the cover to the
position from 45 degrees counterclockwise
of the rotation stopper, and insert it until it
touches to the bottom.
3. Rotate the cap clockwise to align with the
rotating stopper.
4. Return the rotation stopper to the locked
position, and make sure that the cover is
firmly locked.
6
Reattach the lter unit.
1. Attach the joints on both sides of filter unit
to the air hose.
2. Return the duct cover to its original position.
n
NOTE
Attach the filter unit with care of its direction.
Removing the filter unit
Step 2
Filter unit
Air hose
Duct cover
53381-KMJ-00
Taking out the filter
Step 3
Filter
Cap
Projection of cap
Slide the rotation stopper
Case
Rotation stopper
Rotate the stopper 90 degrees or more
53438-KMJ-00
Attaching the filter
Step 5
Cap
Projection of cap
45°
Rotate to the rotation stopper
Insert the filter
Filter inserted into the cap
Rotation
stopper
Lock the cap
53439-KMJ-00
Chapter 5 Lubrication points and schedule
Contents
1. Lubrication tools and grease 5-1
1.1 Compatible grease 5-1
1.2 Grease gun 5-1
2. Lubrication points 5-2
2.1 Printing head unit 5-2
2.1.1 SY-axis 5-2
2.1.2 SZ-axis 5-3
2.2 Conveyor unit 5-4
2.2.1 W1-axis, W2-axis, W3-axis (conveyor auto width) 5-4
2.3 Table unit 5-5
2.3.1 X1-axis and X2-axis 5-5
2.3.2 Y-axis 5-6
2.3.3 Z-axis 5-7
2.3.4 PU-axis 5-8
2.4 Recognition unit 5-9
2.4.1 CX-axis 5-9
2.4.2 CY1-axis and CY2-axis 5-10
2.5 Other lubrication points 5-11
2.5.1 Cleaning unit 5-11
2.5.2 Suction unit 5-12
1. Lubrication tools and grease
5-1
Chapter 5 Lubrication points and schedule
1. Lubrication tools and grease
This section describes the interval and the procedure of lubrication for each parts for YSP10.
n
NOTE
See "Safety instructions" in this document for the way to deal with grease at safe.
1.1 Compatible grease
For greasing procedures, always use the YAMAHA prescribed products.
►
Prescribed grease
Name Part name Part No. Note
Lithium-based grease GREASE PACK K48-M3856-00X NSL 80g, supplied with machine
c
CAUTION
Using unauthorized grease could damage the machine.
1.2 Grease gun
The grease gun has 3 interchangeable nozzle types to accommodate the various greasing point
configurations.Always use the prescribed nozzle for the greasing point in question.
Grease gun
Bend type nozzle
Standard nozzle
Flexible type nozzle
Chuck type
Nozzle
30°
OD φ14 tip
OD φ10 tip
OD
φ
0.5 tip
Grease gun
The various nozzle tips
are inserted here
53501-KMJ-00
Name Part name Part No. Note
Grease gun (with standard
nozzle)
GREASE GUN K48-M3852-00X
GREASE GUN SET
KHW-M3852-A0X
Nozzle (flexible type) GREASE NOZZLE K48-M3857-00X
Nozzle (bent type) GREASE NOZZLE K48-M3854-00X
c
CAUTION
Prepare the tip nozzle for grease to be used. If two or more kinds of grease with different characteristics are mixed in the
nozzle and it is applied, this may cause the machine performance to lower.