YSP10_Mainte_E.pdf - 第4页
CE marking i Safety instructions CE marking This equipment conforms to the EU Machinery Directive 2006/42/EC (description A1 below) and EMC Directive 2014/30/EU (description A2 below). However , this equipment does not b…
w
Be sure to read safety instructions before using YAMAHA sprinter or related products.
Safety instructions
Contents
CE marking i
1. Warning labels ii
1.1 Warning label format and mark description ii
1.1.1 Warning label format ii
1.1.2 Mark description iii
2. Label positions iv
3. Safety viii
3.1 To ensure safety viii
3.1.1 Defining safety viii
3.1.2 Causes of injuries and accidents viii
3.2 Using safety gear ix
3.3 Restrictions on machine use ix
3.3.1 Defining the operator and service personnel ix
3.3.2 Restricting machine operation with passwords ix
3.3.3 Lock out the main switch and the air supply/exhaust switch x
3.4 Cautions during machine operation x
3.5 Cautions during power outage x
3.6 Keeping hands away from moving parts xi
3.7 Handling solvents (including solder, adhesive, and flux) xii
3.8 Handling the laser xiii
3.9 Handling grease and oil xiii
3.10 Handling batteries xiv
3.11 Handling heavy objects xiv
4. Safety message in this manual xv
CE marking
i
Safety instructions
CE marking
This equipment conforms to the EU Machinery Directive 2006/42/EC (description A1 below) and EMC
Directive 2014/30/EU (description A2 below).
However, this equipment does not bear CE marking if a custom order item was installed.
A1.
Cautions regarding the official language of EU countries and the language used in operation manuals, CE
declarations, operation screen characters, and warning labels when this equipment is installed in an EU
country.
• All materials except warning labels are written in English only.
n
NOTE
Warning labels only have pictograms or else include warning messages in English, Chinese, Korean and Japanese
languages.
A2.
EMC description
• Electromagnetic immunity (Immunity)
Complies with test standards as specified by EN 61000-6-2.
• Electromagnetic emissions (Emission)
Complies with test standards for ISM category: Group 1, Class A, as specified by EN 55011.
n
NOTE
Class A equipment is intended for use in industrial environments. If used in other environments, ensuring electromagnetic
compatibility (EMC) might be difficult. Refer to EN 55011 standards for detailed information.
1. Warning labels
ii
Safety instructions
1. Warning labels
Warning labels are attached to the machine body and peripheral equipment to use YAMAHA machines
safely and correctly. Check that the information on each warning label is clearly legible and comply with
the instructions.
1.1 Warning label format and mark description
1.1.1 Warning label format
A warning label indicates the degree of hazard by means of a signal word and the color of the signal word
panel as shown below. A mark and a pictogram are also used to emphasize the message.
Labels attached to the outside of machines are basically in 4 languages (English, Chinese, Korean, and
Japanese) while labels attached to the inside of the machines are only a pictogram.
Warning label format
Warning message and mark (pictogram) example
Signal wordSafety alert symbol
Signal word panel
Message
Mark and pictogram
Danger : Red
Warning : Orange
Caution : Yellow
93001-YSP-00