YSP10_Mainte_E.pdf - 第84页

3. 3-month maintenance 3-37 Chapter 3 Periodic maintenance items 6 Clean SZ-a xis shaft guid e by w ipin g a wa y the grease o r soiling from SZ-axis shaft buide (2 position s) using a lint- fre e c loth. 7 Clean SZ-axis…

100%1 / 130
3. 3-month maintenance
3-36
Chapter 3 Periodic maintenance items
3
Lubricate the SZ-axis guide.
1. Inject the prescribed grease (NSL) to the
grease nipples (2 positions) of guide, until
the grease seep out from gap.
2. Wipe away the excess grease.
4
Move the PSC to left side by hand, to
facilitate the access to SZ-axis shaft
guide.
5
Lower the SZ-axis downmost.
1. Press the [Move Axes] button on [Unit] -
[Conveyor] screen to open "SY/SZ" screen.
2. Press the [Brake] button of SZ-axis, then the
SZ-axis brake is released and SZ-axis lowers
to its downmost.
Lubricating SZ-axis guide
Step 3
Grease gun (bent type nozzle)
Grease nipples of guide
53381-KMJ-00
Moving PSC
Step 4
PSC
53378-KMJ-00
Lowering SZ-axis
Step 5
Press the [Brake] button
“SY/SZ” tab
54343-KMJ-00
3. 3-month maintenance
3-37
Chapter 3 Periodic maintenance items
6
Clean SZ-axis shaft guide by wiping
away the grease or soiling from SZ-axis
shaft buide (2 positions) using a lint-
free cloth.
7
Clean SZ-axis ball screw by wiping away
the grease or soiling from SZ-axis ball
screw (1 position), along the arrowed
direction illustrated at right, using a
lint-free cloth.
n
NOTE
Carefully wipe the lead grooves of the ball screw.
Additionally, make sure that any dirt is not remained.
8
Apply the prescribed grease (NSL) by
hand uniformly to shaft guide (2
positions).
Applying grease to SZ-axis shaft guides
Step 8
Prescribed grease
Shaft guides
53382-KMJ-00
Cleaning SZ-axis shaft guides
Step 6
Lint-free cloth
Shaft guides
53379-KMJ-00
Cleaning SZ-axis ball screw
Step 7
Lint-free cloth
Access from here
Machine front
Viewed from rear
Ball screw
53380-KMJ-00
3. 3-month maintenance
3-38
Chapter 3 Periodic maintenance items
9
Lubricate the ball screw.
1. Inject the prescribed grease (NSL) to the
grease nipple (1 position) of ball screw
using a grease gun (standard type nozzle)
until the grease seep out from gap.
2. Wipe away the excess grease.
TIP
Face the grease gun lever downward upon injection.
Lubricating SZ-axis ball screw
Step 9
Grease gun (standard type)
Viewed from front
Grease nipple of
ball screw
53383-KMJ-00