YSP10_Mainte_E.pdf - 第80页
3. 3-month maintenance 3-33 Chapter 3 Periodic maintenance items 6 Wi pe aw ay the grease or soiling from the SZ-axis ball screw (1 position), its shaft guides u sing a lint-fre e c loth. n NOTE Carefully wipe the lead g…
3. 3-month maintenance
3-32
Chapter 3 Periodic maintenance items
3
Clean the underside of SZ-axis guide (2
positions) by wiping away the grease or
soiling using a lint-free cloth.
n
NOTE
Carefully wipe the guide grooves. Additionally, make sure
that any dirt is not produced.
4
Lower the SZ-axis downmost.
1. Press the [Move Axes] button on [Unit] -
[Conveyor] screen to open "SY/SZ" screen.
2. The SZ-axis brake is released by pressing its
[brake] button, and the SZ-axis lowers to its
downmost.
5
Clean the upperside of SZ-axis guide (2
positions) and shaft guides (2 positions)
by wiping away the grease or soiling
using a lint-free cloth.
n
NOTE
Carefully wipe the guide grooves. Additionally, make sure
that any dirt is not produced.
Cleaning underside of SZ-axis guide
Step 3
Lint-free
cloth
Guide
Guide
53372-KMJ-10
Cleaning upperside of SZ-axis and shaft guide
Step 5
Shaft guide
Upperside of guides
Lint-free cloth
53373-KMJ-10
Lower SZ-axis
Step 4
Press the [Brake] button
“SY/SZ” tab
54344-KMJ-00
3. 3-month maintenance
3-33
Chapter 3 Periodic maintenance items
6
Wipe away the grease or soiling from
the SZ-axis ball screw (1 position), its
shaft guides using a lint-free cloth.
n
NOTE
Carefully wipe the lead grooves of the ball screw.
Additionally, make sure that any dirt is not remained.
7
Apply the prescribed grease (NSL) by
hand uniformly to the surface of the
shaft guides (2 positions).
8
Inject the grease to the ball screw using
a grease gun.
1. Using a grease gun (standard type nozzle),
inject the prescribed grease (NSL) to the
grease nipple of ball screw until the grease
seep out from the gap.
2. Wipe away the excess grease from the ball
screw.
Cleaning SZ-axis ball screws
Step 6
Viewed from rear side
Ball screws
Access from here
Lint-free cloth
Machine front side
53374-KMJ-10
Greasing up SZ-axis shaft guide
Step 7
Shaft guide
Prescribed grease
53375-KMJ-10
Lubricating SZ-axis ball screw
Step 8
Grease gun (standard type nozzle)
Viewed from front
Grease nipple of
ball screw
53384-KMJ-00
3. 3-month maintenance
3-34
Chapter 3 Periodic maintenance items
9
Inject the grease to the guide using a
grease gun.
1. Change the nozzle to the bent type nozzle
and inject the prescribed grease (NSL) to the
grease nipples of the guide (2 positions)
until the grease seep out from the gap.
2. Wipe away the excess grease.
0
Reattach the SZ-axis front cover to its
original position using Phillips
screwdriver.
Lubricating SZ-axis guide
Step 9
Grease gun (bent type nozzle)
Grease nipple of guide
Grease nipple of guide
53385-KMJ-00