00197454-01_AI_Portal_40mm_TwinVHF_SX12_de_en.pdf - 第129页
assembly 3.7.8 Modifications in SIPLACE Pro Final Work Reconfiguration Kit Twin VHF with Gantry Re configuration Kit Twin VHF mit Portal 129 Setups The ne w gant ry conf iguration of the station configuration is us ed au…
assembly
Final Work 3.7.8 Modifications in SIPLACE Pro
128 Reconfiguration Kit Twin VHF with Gantry Reconfiguration Kit Twin VHF mit Por
-
3.7.8
3.7.8 Modifications in SIPLACE Pro
Modifications in SIPLACE Pro
Station
The SX machine type has to be configured in the Station Editor. At the standard station configuration
either Single gantry (SX1) or Double gantry (SX2) can be selected.
The new machine configurations are automatically used for new setups.
After a hardware change adequate modifications have to be made in SIPLACE Pro.
Station configuration setting Single gantry (SX1) or Double gantry (SX2)
assembly
3.7.8 Modifications in SIPLACE Pro Final Work
Reconfiguration Kit Twin VHF with Gantry Reconfiguration Kit Twin VHF mit Portal 129
Setups
The new gantry configuration of the station configuration is used automatically when new setups are cre
-
ated
If the existing Setups should be used in the future then each setup must be changed to match the gantry
configuration.
Modification of gantry configuration in the respective setup.
Location 2 can be configured afterwards.
The respective head, cameras, nozzles and tables at location 2 has to be edited.
assembly
Final Work 3.7.8 Modifications in SIPLACE Pro
130 Reconfiguration Kit Twin VHF with Gantry Reconfiguration Kit Twin VHF mit Por
-
Configuration of head, cameras, nozzles and tables
Recipes / Jobs
If existing recipes and jobs should be used in the future then all of them have to be re-optimized with the
new gantry configuration.