YSH20_Ope_E.pdf - 第111页
Chapter 3 Star ting and ending production Contents 1. Starting production 3- 1 1.1 Resuming operation from the stopped point 3- 6 1.1.1 Loading the saved data 3- 7 1.1.2 Editing mount flags 3- 7 1.2 Using the "block…
2-53
2
asic operation
n
Wafer tray changer
1
Open the wafer tray changer screen.
Press the [Unit] button and then select the [Wafer TC] tab to open the wafer tray changer screen.
2
Extract a tray from the tray changer.
Press the [Pallet Set] button to check whether a pallet is correctly extracted from the tray changer.
Wafer tray changer screen
Selecting a pallet
[Pallet Set] button
Enter a pallet number.
24233-H0-00
Chapter 3 Starting and ending production
Contents
1. Starting production 3-1
1.1 Resuming operation from the stopped point 3-6
1.1.1 Loading the saved data 3-7
1.1.2 Editing mount flags 3-7
1.2 Using the "block skip function" 3-8
1.2.1 Selecting the blocks 3-9
1.2.2 Starting operation 3-10
2.
Ending production and turning power off
3-11
3
3.1 Production 3-13
5
7
9
3.5 Alignment 3-21
3.6 Retry 3-21
2
2
3
3.10 Pick Rate Warning 3-24
3-1
3
Starting and ending production
1. Starting production
This section describes how to select the board data which is already registered and perform component
mounting.
1
Select the board data.
1. When the board data is not yet selected, press the [Board] button on the Setup screen.
A list of registered board data appears.+
2. Line up the cursor with the board data to use for production and press the [Select] button.
The machine loads the seleted board data.
Press [Board] button.
Selecting the board data
Select board data from list.
Selected board name is displayed.
24300-H0-00