00195813-07_IM_SSW_605.03_SP3_DE EN.pdf - 第19页
Installat ion Manual, Station Software Version 605.03 SP 3 12 /2012 E dition 19 of 46 4.5 Network C onfigura tion Station computer Machine controller 10Base-T 100Base-T Private network between station computer, Vision co…
Installation Manual, Station Software Version 605.03 SP3 12/2012 Edition
18 of 46
4.4.3 Vision Computer (Optional)
Name
SIMATIC Box PC 627
CPU / clock frequency
Pentium M / 2 GHz
RAM
1 GB
Hard disk
40 GB
External DVD drive
Yes
Serial interfaces
1
USB interfaces and external USB hub
Yes
Network
2x 100 MBit
Table 4-12: Vision computer hardware (optional for SIPLACE CA3 with 3D coplanarity sensor)
Installation Manual, Station Software Version 605.03 SP3 12/2012 Edition
19 of 46
4.5 Network Configuration
Station computer
Machine controller
10Base-T
100Base-T
Private network between
station computer,
Vision computer (optional)
and machine controller
SIPLACE LAN
SIPLACE Pro
Twisted Pair TP
(100 MB)
Twisted Pair TP
(10 MB)
Vision computer
(optional)
100Base-T
Fig. 4-1: Network connections between the machine and SIPLACE Pro
A separate private network (100 Mbit) is set up between the station computer (and optionally the Vision
computer) and the machine controller via a subnet mask.
Fixed IP addresses for the station computer, Vision computer and machine controller can thus be assigned
for all SIPLACE machines. These IP addresses are not known outside the private network, for instance in
the SIPLACE LAN or customer LAN.
These IP addresses need not be further configured by the operator while the station software is being
installed.
IP address, station computer
192.168.255.249
IP address, machine controller
192.168.255.250
Vision computer IP Address
192.168.255.251
Subnet mask, station computer/machine controller
255.255.255.248
IP address range, SIPLACE LAN or
IP address range, customer LAN
172.22.xxx.xxx
is configured on-site
Subnet mask for SIPLACE-LAN or
subnet mask for customer LAN
255.255.0.0
is configured on-site
Table 4-13: Network configuration
Installation Manual, Station Software Version 605.03 SP3 12/2012 Edition
20 of 46
5 Installing the Station Software
NOTICE
The operation system must be installed on the machine controller and Vision computer
before installing the station software.
5.1 Installation Sequence
Back up the MA data
(SITEST)
BIOS update on the station computer
Create setup CD and perform automatic
BIOS update
Install Windows XP operating system
for the station computer
(including installation of the touch screen)
Install SIPLACE software
(station software incl. additional programs)
Finish the installation
BIOS settings on the station computer
Create setup CD and perform automatic
BIOS settings
See section 5.2.
See section 5.2.
See the separate installation manual for installing the "Windows
XP operating system" (item no. [00194575-xx], [00195327-xx]
or [00196737-xx] respectively)
For calibrating the touch screen, see sections 5.3.3.
See sections 5.3 and 5.4.
See section 5.5.