4OM-1075-002.pdf - 第112页
Error ID Item Description 050101 Y 2 Axis Origin Encoder origin was not detected. 050102 Y 2 Axis Origin Origin sensor (slide) was not detected. 050103 Y 2 Axis Origin Origin sensor (slide) and Limit error has been de- t…
Error ID Item Description
04060c Y1 Axis Servo Error Servo off timeout.
04060d Y1 Axis Servo Error System error.
04060e Y1 Axis Servo Error Invalid command.
04060f Y1 Axis Servo Error Error1 (No Factor)
040610 Y1 Axis Servo Error Error2 (No Factor)
040611 Y1 Axis Servo Error Emergency stop (EXT1) when servo on
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
040701 Y1 Axis Interlock Servo alram (Interlock boad)
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
041001 Y Axis Limit Both Limit error has been detected.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
0308-004 2-26 AHB01ETRP
3.3 Error IDs and Remedial Procedures
Error ID Item Description
050101 Y2 Axis Origin Encoder origin was not detected.
050102 Y2 Axis Origin Origin sensor (slide) was not detected.
050103 Y2 Axis Origin Origin sensor (slide) and Limit error has been de-
tected.
050104 Y2 Axis Origin Feedback value is indefinite.
050105 Y2 Axis Origin Y2 axis is not at origin.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
3.3 Error IDs and Remedial Procedures
0308-002 2-26-1 AHB01ETRP
Error ID Item Description
050106 Y2 Axis Origin Y axis origin data (Y2) is over range.
(Cause 1) See the indication.
(Remedy 1) Set parameter
(offset) in the "Y2[mm]" text box of the label "Y-axis origin".
050201 Y2 Axis Timing Task has not been completed unable to continue.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
050301 Y2 Axis Data The driver data was detected outside of the possible
range.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
050401 Y2 Axis Limit (+) Limit error has been detected.
050402 Y2 Axis Limit (-) Limit error has been detected.
(Cause 1) The X1 axis might have overrun due to generation of noises, overcurrent, etc.
The sensor may be defective.
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
3.3 Error IDs and Remedial Procedures
0308-001 2-26-2 AHB01ETRP