4OM-1075-002.pdf - 第73页
T able 4B1-4 Check Codes Display Section (A) Display Section (B) 030132 The global P .E.C. recognition function is specified as "Invalid". 030133 The local P .E.C. recognition function is specified as "Inv…
Table 4B1-3
Check Codes Display Section (A) Display Section (B)
03011b The operation mode switch on other side is set to the
"SET UP" mode.
03011c This cannot be executed without a P.C.B. at the
positioning section.
03011d When the machine is set in the "PAUSE" mode, the
NC axis under control of the current value cannot be
zeroed.
03011e A component is being picked up. Start the automatic
operation after the component is collected or the
vacuum is shut off.
03011f The [Ready] button does not work while the machine
is running.
030120 Cannot start by Machine is not in "STOP" mode.
030121 Cannot start by Machine is not in "STOP" or "PAUSE"
mode.
030122 The specified camera is seleced Skip mode.
030123 Move the elevator to its home position.
030125 Illegal parameters are set as "Side length X [mm]",
"Side length Y [mm]", "Pitch X [mm]", and "Pitch Y
[mm]" in the tray data (test library data),
030126 The specified feeder or step No. is bypassed in the
current pattern program data.
030127
030128 The [V.Bend Detection Dsbl.] button is selected in the
library data.
030129
03012a Nozzle storage/attachment actions cannot take place
at the specified stocker position for the selected
head.
03012b Nozzle stocker [B1] is being opened.
03012c Nozzle stocker [B2] is being opened.
03012d Collect picked up component by Vacuum OFF Head
1 button operation on AUTO OPN display. And then
perform zeroing operation.
03012e Collect picked up component by Vacuum OFF Head
2 button operation on AUTO OPN display. And then
perform zeroing operation.
03012f
030130 In the case of "All Selection", keep all nozzles on the
heads stored.
030131 Nozzle number error.
1.2 "CHECK" Windows
0308-002 2-3-3 AHB01ETRP
Table 4B1-4
Check Codes Display Section (A) Display Section (B)
030132 The global P.E.C. recognition function is specified as
"Invalid".
030133 The local P.E.C. recognition function is specified as
"Invalid".
030134 The image P.E.C. recognition function is specified as
"Invalid".
030135 The selected head No. does not match the P.E.C
recognition head.
030136 Open the safety door, and then perform the work.
030137 Turning off Vacuum for the head is not allowed when
the head is located on the product PCB.
030138 Starting of production is not allowed during P.E.C
Recog Manual Alignment mode.
030139 Zero L Axis. (or push EMER Stop switch.)
03013a TRAY is getting ready now.
03013b The Operation Box is available in the "SETUP" mode.
03013c The Operation Box is not connected.
03013d The specified head is seleced Skip mode.
03013e Tray Supply Switch is not available while data chang-
ing.
03013f Open the safety door, and check the nozzle length.
030201
030301
030302
030303
030401
030402
030403
050101 No Current Incorrect data found within internal current program.
Please retry program change.
050201 Setup Check Set up the conveyor width (P.C.B. Width).
050202
050203
050204
050205
050206
050207
070101 Front Safety Door
070201 Rotary Wheel
070301 Front Area Sensor
1.2 "CHECK" Windows
0308-001 2-3-4 AHB01ETRP
Table 4B1-5
Check Codes Display Section (A) Display Section (B)
070401 Unavailable Data
070402 Specified data is not available.
070403 Unavailable data.
090101
090201
090301
090401
090402
090501
090601
090701
090702 Check the feeder.
090703
090704
090705
090801 Furnace Signal Check the furnace signal.
090901
091001
0b0101
0b0102
0b0201
0b0202
0d0101 Out Of Origin Press the [ALL] button to zero all devices.
0d0102 Zero X1 Axis.
0d0103 Zero X2 Axis.
0d0104 Zero Y Axis.
0d0105 Zero L1 Axis.
0d0106 Zero L2 Axis.
0d0107 Zero Z1 Axis.
0d0108 Zero Z2 Axis.
0d0109 Zero NC1 Axis.
0d010a Zero NC2 Axis.
0d010b Zero BPC Axis.
0d010c Zero Tray1 Unit.
0d010d Zero Tray2 Unit.
0d010e Zero all devices.
990101 Feeder Ready Check Tape Feeder Not Ready (Feeder Base No.1)!!
990102 Tape Feeder Not Ready (Feeder Base No.2)!!
990103 Tape Feeder Not Ready (Feeder Base No.3)!!
990104 Tape Feeder Not Ready (Feeder Base No.4)!!
990105 Tray Feeder Empty (Tray No.1)!!
990106 Tray Feeder Empty (Tray No.2)!!
1.2 "CHECK" Windows
0308-001 2-3-5 AHB01ETRP