4OM-1075-002.pdf - 第74页
T able 4B1-5 Check Codes Display Section (A) Display Section (B) 070401 Unavailable Data 070402 Specified data is not available. 070403 Unavailable data. 090101 090201 090301 090401 090402 090501 090601 090701 090702 Che…
Table 4B1-4
Check Codes Display Section (A) Display Section (B)
030132 The global P.E.C. recognition function is specified as
"Invalid".
030133 The local P.E.C. recognition function is specified as
"Invalid".
030134 The image P.E.C. recognition function is specified as
"Invalid".
030135 The selected head No. does not match the P.E.C
recognition head.
030136 Open the safety door, and then perform the work.
030137 Turning off Vacuum for the head is not allowed when
the head is located on the product PCB.
030138 Starting of production is not allowed during P.E.C
Recog Manual Alignment mode.
030139 Zero L Axis. (or push EMER Stop switch.)
03013a TRAY is getting ready now.
03013b The Operation Box is available in the "SETUP" mode.
03013c The Operation Box is not connected.
03013d The specified head is seleced Skip mode.
03013e Tray Supply Switch is not available while data chang-
ing.
03013f Open the safety door, and check the nozzle length.
030201
030301
030302
030303
030401
030402
030403
050101 No Current Incorrect data found within internal current program.
Please retry program change.
050201 Setup Check Set up the conveyor width (P.C.B. Width).
050202
050203
050204
050205
050206
050207
070101 Front Safety Door
070201 Rotary Wheel
070301 Front Area Sensor
1.2 "CHECK" Windows
0308-001 2-3-4 AHB01ETRP
Table 4B1-5
Check Codes Display Section (A) Display Section (B)
070401 Unavailable Data
070402 Specified data is not available.
070403 Unavailable data.
090101
090201
090301
090401
090402
090501
090601
090701
090702 Check the feeder.
090703
090704
090705
090801 Furnace Signal Check the furnace signal.
090901
091001
0b0101
0b0102
0b0201
0b0202
0d0101 Out Of Origin Press the [ALL] button to zero all devices.
0d0102 Zero X1 Axis.
0d0103 Zero X2 Axis.
0d0104 Zero Y Axis.
0d0105 Zero L1 Axis.
0d0106 Zero L2 Axis.
0d0107 Zero Z1 Axis.
0d0108 Zero Z2 Axis.
0d0109 Zero NC1 Axis.
0d010a Zero NC2 Axis.
0d010b Zero BPC Axis.
0d010c Zero Tray1 Unit.
0d010d Zero Tray2 Unit.
0d010e Zero all devices.
990101 Feeder Ready Check Tape Feeder Not Ready (Feeder Base No.1)!!
990102 Tape Feeder Not Ready (Feeder Base No.2)!!
990103 Tape Feeder Not Ready (Feeder Base No.3)!!
990104 Tape Feeder Not Ready (Feeder Base No.4)!!
990105 Tray Feeder Empty (Tray No.1)!!
990106 Tray Feeder Empty (Tray No.2)!!
1.2 "CHECK" Windows
0308-001 2-3-5 AHB01ETRP
Table 4B1-6
Check Codes Display Section (A) Display Section (B)
990107 Install the vibratory stick feeder. (Feeder Base #1)
990108 Install the vibratory stick feeder. (Feeder Base #2)
990109 Install the vibratory stick feeder. (Feeder Base #3)
99010a Install the vibratory stick feeder. (Feeder Base #4)
99010b Feeder Empty (Feeder Base #1)!!
99010c Feeder Empty (Feeder Base #2)!!
99010d Feeder Empty (Feeder Base #3)!!
99010e Feeder Empty (Feeder Base #4)!!
990201 Feeder Ready Check Set the feeder pullout Feeder Base #1 Safty Bar
990202 Set the feeder pullout Feeder Base #2 Safty Bar
990203 Set the feeder pullout Feeder Base #3 Safty Bar
990204 Set the feeder pullout Feeder Base #4 Safty Bar
990301 Feeder Alternate Prepare for the feeder that can be used for compo-
nent picks.
1.2 "CHECK" Windows
0308-001 2-3-6 AHB01ETRP