4OM-1075-002.pdf - 第72页
T able 4B1-3 Check Codes Display Section (A) Display Section (B) 0301 1b The operation mode switch on other side is set to the "SET UP" mode. 0301 1c This cannot be executed without a P .C.B. at the positioning…
Table 4B1-2
Check Codes Display Section (A) Display Section (B)
030102 The safety door is open.
030103 The operation mode switch is set to the "SET UP"
side.
030104 The load power supply is not set ready (OFF).
030105 The power cannot be supplied with the operation
mode switch in the "SET UP" mode.
030106 The safety door lock is open.
030107 EMER Stop button is on.
030108 The operation mode switch was changed over with
the machine in a mode other than "STOP".
030109 The operation mode switch on the invalid side was
changed over.
03010a The operation mode switch was changed over with
the safety door being open.
03010b Specify the feeder No. for automatic component
picks.
03010c No tray feeder No. can be specified for manual com-
ponent picks.
03010d No component (Test ID) is specified.
03010e The specified nozzle is not attached to the head.
03010f The specified camera cannot be used for the speci-
fied component (Test ID).
030110 Components cannot be picked up from the specified
feeder No., usin the specified head.
030111 Enter the tray setting matrix X and Y correctly.
030112 Another automatic operation cannot be started at the
same time.
030113 The [Component Feed Dsbl.] button is selected in
thetest mode data.
030114 The [Tray Cmpnt Feed Dsbl.] button is selected in the
test mode data.
030115 "TRAY" is not set as a carrier type in the test library
data.
030116 The door of the tray is open.
030117 "VIB. STICK" is not specified in the "CARRIER TYPE"
text box in the test library data.
030118 The feeder No. to be selected is not specified for the
production model or the vibratory stick feeder is not
connected.
030119 The selected feeder No. does not match the carrier
type specified in the test library data.
03011a Feeder No error.
1.2 "CHECK" Windows
0308-002 2-3-2 AHB01ETRP
Table 4B1-3
Check Codes Display Section (A) Display Section (B)
03011b The operation mode switch on other side is set to the
"SET UP" mode.
03011c This cannot be executed without a P.C.B. at the
positioning section.
03011d When the machine is set in the "PAUSE" mode, the
NC axis under control of the current value cannot be
zeroed.
03011e A component is being picked up. Start the automatic
operation after the component is collected or the
vacuum is shut off.
03011f The [Ready] button does not work while the machine
is running.
030120 Cannot start by Machine is not in "STOP" mode.
030121 Cannot start by Machine is not in "STOP" or "PAUSE"
mode.
030122 The specified camera is seleced Skip mode.
030123 Move the elevator to its home position.
030125 Illegal parameters are set as "Side length X [mm]",
"Side length Y [mm]", "Pitch X [mm]", and "Pitch Y
[mm]" in the tray data (test library data),
030126 The specified feeder or step No. is bypassed in the
current pattern program data.
030127
030128 The [V.Bend Detection Dsbl.] button is selected in the
library data.
030129
03012a Nozzle storage/attachment actions cannot take place
at the specified stocker position for the selected
head.
03012b Nozzle stocker [B1] is being opened.
03012c Nozzle stocker [B2] is being opened.
03012d Collect picked up component by Vacuum OFF Head
1 button operation on AUTO OPN display. And then
perform zeroing operation.
03012e Collect picked up component by Vacuum OFF Head
2 button operation on AUTO OPN display. And then
perform zeroing operation.
03012f
030130 In the case of "All Selection", keep all nozzles on the
heads stored.
030131 Nozzle number error.
1.2 "CHECK" Windows
0308-002 2-3-3 AHB01ETRP
Table 4B1-4
Check Codes Display Section (A) Display Section (B)
030132 The global P.E.C. recognition function is specified as
"Invalid".
030133 The local P.E.C. recognition function is specified as
"Invalid".
030134 The image P.E.C. recognition function is specified as
"Invalid".
030135 The selected head No. does not match the P.E.C
recognition head.
030136 Open the safety door, and then perform the work.
030137 Turning off Vacuum for the head is not allowed when
the head is located on the product PCB.
030138 Starting of production is not allowed during P.E.C
Recog Manual Alignment mode.
030139 Zero L Axis. (or push EMER Stop switch.)
03013a TRAY is getting ready now.
03013b The Operation Box is available in the "SETUP" mode.
03013c The Operation Box is not connected.
03013d The specified head is seleced Skip mode.
03013e Tray Supply Switch is not available while data chang-
ing.
03013f Open the safety door, and check the nozzle length.
030201
030301
030302
030303
030401
030402
030403
050101 No Current Incorrect data found within internal current program.
Please retry program change.
050201 Setup Check Set up the conveyor width (P.C.B. Width).
050202
050203
050204
050205
050206
050207
070101 Front Safety Door
070201 Rotary Wheel
070301 Front Area Sensor
1.2 "CHECK" Windows
0308-001 2-3-4 AHB01ETRP