4OM-1075-002.pdf - 第286页
Error ID Item Description 02 ** 3400 ** Error in Line Detection 02 ** 3401 ** Error in Line Detection Some linear edges cannot be detected they are hidden by the nozzle. 02 ** 3402 ** Error in Line Detection No Linear Ed…
Error ID Item Description
02 ** 3300 ** Error in Edge Detection
02 ** 3301 ** Error in Edge Detection Some edges cannot be detected because they are
hidden by the nozzle.
02 ** 3302 ** Error in Edge Detection No Edge Detected.
02 ** 3303 ** Error in Edge Detection Upper Edge Not Detected.
02 ** 3304 ** Error in Edge Detection Left Edge Not Detected.
02 ** 3305 ** Error in Edge Detection Lower Edge Not Detected.
02 ** 3306 ** Error in Edge Detection Right Edge Not Detected.
(Cause 1) The selected component does not match the nozzle.
(Cause 2) Wrong parameters (edge data) are set for the selected component in the
component library data.
(Cause 3) The tapered part of the vacuum nozzle end or the diffusion plate is stained.
Fig. 4B53
(Remedy 1) Check the selected component and the vacuum nozzle.
(Remedy 2) Check the edge condition of the selected component and the component
library data.
If wrong parameters are set in the component library data, correct them.
(Remedy 3) Clean the vacuum nozzle end or the diffusion plate.
4.3 Recognition Error IDs and Remedial Procedures
0308-004 2-144 AHB01ETRP
Dirty Spots
Component
Vacuum Nozzle
Error ID Item Description
02 ** 3400 ** Error in Line Detection
02 ** 3401 ** Error in Line Detection Some linear edges cannot be detected they are
hidden by the nozzle.
02 ** 3402 ** Error in Line Detection No Linear Edge Detected.
02 ** 3403 ** Error in Line Detection The Deteted Linear Edge Position Does Not The
Position Data.
02 ** 3500 ** Error in Lead Detection
02 ** 3501 ** Error in Lead Detection Some leads cannot be detected because they are
hidden by the nozzle.
02 ** 3502 ** Error in Lead Detection No Lead Detected.
02 ** 3503 ** Error in Lead Detection Corner of Leads Not Detected.
02 ** 3504 ** Error in Lead Detection Ends of Leads Not Detected.
02 ** 3505 ** Error in Lead Detection Ends of Arrayed Leads Not Detected.
02 ** 3506 ** Error in Lead Detection Lead Edges of Corner Not Detected.
02 ** 3507 ** Error in Lead Detection Leads of Corner Not Detected.
02 ** 3508 ** Error in Lead Detection The number of leads at the detected corner is
smaller than the set value.
02 ** 3509 ** Error in Lead Detection Incorrect Lead-to-Lead Distance at Detected Cor-
ner.
02 ** 3510 ** Error in Lead Detection Incorrect Lead-to-Lead Angle at Detected Corner.
02 ** 3512 ** Error in Lead Detection The detected number of leads is smaller than the
set value.
02 ** 3513 ** Error in Lead Detection The detected number of leads is larger than the
set value.
02 ** 3514 ** Error in Lead Detection Incorrect Detected Group-to-Group Distance.
02 ** 3515 ** Error in Lead Detection The Detected Lead Position Does Not Match the
Position Data.
(Cause 1) The results of the lead detection differ from the parameters specified in the
component library data for the selected components.
(Remedy 1) Check the leads of the selected component and the component library
data.
If wrong parameters are set in the component library data, correct them.
4.3 Recognition Error IDs and Remedial Procedures
0308-003 2-145 AHB01ETRP
Error ID Item Description
02 ** 3600 ** Error in Electrode (Ball) Detection.
02 ** 3601 ** Error in Electrode (Ball) Detection. No Electrode (Ball) Detected.
02 ** 3602 ** Error in Electrode (Ball) Detection. Since a sufficient number of Electrode (Ball) were
undetectable, it cannot position.
02 ** 3603 ** Error in Electrode (Ball) Detection. There is Electrode (Ball) undetectable in the line or
sequence ofa group outside.
02 ** 3604 ** Error in Electrode (Ball) Detection. Electrode (Ball) which is in agreement with data
was undetectable.
02 ** 3605 ** Error in Electrode (Ball) Detection. Electrode (Ball) which is not specified was de-
tected.
(Cause 1) The results of the lead detection differ from the parameters specified in the
component library data for the selected components.
(Remedy 1) Check the leads of the selected component and the component library
data.
If wrong parameters are set in the component library data, correct them.
02 ** 4200 ** Error in Pick-up Position Detection.
02 ** 4201 ** Error in Pick-up Position Detection. The pick-up position has deviated greatly in X di-
rection.
02 ** 4202 ** Error in Pick-up Position Detection. The pick-up position has deviated greatly in Y di-
rection.
02 ** 4203 ** Error in Pick-up Position Detection. The pick angular skew is big.
(Cause 1) The results of the lead detection differ from the parameters specified in the
component library data for the selected components.
(Remedy 1) Check the leads of the selected component and the component library
data.
If wrong parameters are set in the component library data, correct them.
4.3 Recognition Error IDs and Remedial Procedures
0308-004 2-146 AHB01ETRP