4OM-1075-002.pdf - 第233页
Error ID Item Description 6f162e Tray 1 Feeder Zeroing Error 6f162f Tray 1 Feeder Zeroing Error (Cause 1) Self-Diagnostics Error Message (Remedy 1) Remove the mispicked component on the tray . 6f1701 Tray 1 Feeder Zeroin…
0206-001 2-1 13-8 AHB01ETRP
Error ID Item Description
6f1625 Tray 1 Feeder Zeroing Error The rack shutter did not close within the specified
time. (2301)
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Check Sensors BPS502 and BPS504.
6f1626 Tray 1 Feeder Zeroing Error The elevator movement to the return step ended in an
error condition. (2401)
6f1627 Tray 1 Feeder Zeroing Error The elevator movement to the return step ended in an
error condition. (2501)
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
6f1628 Tray 1 Feeder Zeroing Error Defective Pallet Detection Sensor (BPH514) (1603)
6f1629 Tray 1 Feeder Zeroing Error Defective Pallet Detection Sensor (BPH514) (2601)
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Check Sensor BPH514.
6f162a Tray 1 Feeder Zeroing Error The zeroing operation of the elevator ended in an
error condition. (2701)
6f162b Tray 1 Feeder Zeroing Error The zeroing operation of the elevator ended in an
error condition. (2801)
6f162c Tray 1 Feeder Zeroing Error The zeroing operation of the elevator ended in an
error condition. (2901)
6f162d Tray 1 Feeder Zeroing Error Origin Not Detected by Sensor (3001)
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
3.3 Error IDs and Remedial Procedures
Error ID Item Description
6f162e Tray 1 Feeder Zeroing Error
6f162f Tray 1 Feeder Zeroing Error
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Remove the mispicked component on the tray.
6f1701 Tray 1 Feeder Zeroing Error A palllet was detected at the elevator origin.
(BPH514) (5001)
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Check Sensor BPH514.
6f1901 Tray 1 Feeder Zeroing Error The L1 axis might be located lower than the pass
line.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) ) Zero the L1 axis.
6f1902 Tray 1 Feeder Zeroing Error The L2 axis might be located lower than the pass
line.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero the L2 axis.
3.3 Error IDs and Remedial Procedures
0206-001 2-1 13-9 AHB01ETRP
Error ID Item Description
700001 Tray 2 Operation Error The elevator stopped running in an error condition.
700002 Tray 2 Operation Error The traverse stopped running in an error condition.
700003 Tray 2 Operation Error Rack Shutter Opening Out of Time Limit
700004 Tray 2 Operation Error Rack Shutter Closing Out of Time Limit
700005 Tray 2 Operation Error Pallet Chuck Opening Out of Time Limit
700006 Tray 2 Operation Error Pallet Chuck Closing Out of Time Limit
700101 Tray 2 System Error Tray No. Error
700102 Tray 2 System Error Feeder No. Error
700103 Tray 2 System Error Step No. Error
700104 Tray 2 System Error
700105 Tray 2 System Error
700106 Tray 2 System Error
700107 Tray 2 System Error
700108 Tray 2 System Error
700109 Tray 2 System Error
70010a Tray 2 System Error
70010b Tray 2 System Error
70010c Tray 2 System Error
70010d Tray 2 System Error
70010e Tray 2 System Error
70010f Tray 2 System Error
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
3.3 Error IDs and Remedial Procedures
0206-001 2-1 13-10 AHB01ETRP