NR_Mechanischer_Stopper.pdf - 第184页

Assembly Instructions PCB Stopper Sin gle Conveyor SIPLACE S-27HM / HS-60 / D4 / D3 / HF- / X-Series Edition 06/2007 184 14.2 Inst allation 14.2.1 Inst allation of th e guide rail with trailing cables O Remove the lif ti…

100%1 / 238
Assembly Instructions PCB Stopper Single Conveyor SIPLACE S-27HM / HS-60 / D4 / D3 / HF- / X-Series
Edition 06/2007
183
Fig. 157 Overview S-27HM (Fig. 4) Dual conveyor
Legend (Figs. 3 and 4) Dual conveyor 14
14
1 Lifting table plate Option Stopper DC
SP1
8 Energy chain holder
2 Lifting table plate Option Stopper DC
SP2
9 DIN EN ISO 7380-M3 x 6-A2
3 Basic unit Stopper S27 10 DIN 934 - M 3 - A2
4 Holder for guide strip S27 11 Distance block for energy chain,
compl.
5 Guide strip S27 12 Distance block for energy chain,
compl.
6 DIN912-M4 x 40-A2-70 13 Energy chain E04
7 DIN912-M5 x 20-A2-70
Assembly Instructions PCB Stopper Single Conveyor SIPLACE S-27HM / HS-60 / D4 / D3 / HF- / X-Series
Edition 06/2007
184
14.2 Installation
14.2.1 Installation of the guide rail with trailing cables
O Remove the lifting table plates.
Fig. 158 Lifting table plate with 4 screws (here conveyor track 1)
4 screws
per plate
Assembly Instructions PCB Stopper Single Conveyor SIPLACE S-27HM / HS-60 / D4 / D3 / HF- / X-Series
Edition 06/2007
185
O Place the width adjustment in the center.
To do this, move the belt of the side adjustment by hand. This is located on the outside of con-
veyor track 1 of the lifting table.
Fig. 159 Belt of width adjustment
O Screw the guide rail holders to the lifting table on the left and right, each with two cylinder head
bolts with hexagon socket head M4 x 40 DIN 912.
Note:
The holders on the left and right are identical in shape but are installed at 180 degrees to each
other. Make sure when installing them that the projection of each holder lies on the external side
of the lifting table.
The length of the holders [03037444-xx] is 54 mm on the S-27HM.
Fig. 160 Holders on the lifting table
Belt of
width adjustment
Width adjustment
Holder
right
Con-
veyor
track 1
Holder
left
Con-
veyor
track 2
Lifting table