NR_Mechanischer_Stopper.pdf - 第229页
Assembly Instructions PCB Stopper Single Conveyor SIPL ACE S-27HM / HS-60 / D4 / D 3 / HF- / X-Series << > Edition 06/2007 << > 229 18.1 T esting individual functions O T ake a PCB and move it throug h …
Assembly Instructions PCB Stopper Single Conveyor SIPLACE S-27HM / HS-60 / D4 / D3 / HF- / X-Series
Edition 06/2007
228
O After the restart, change over to the SITEST Conveyor Functions.
Here you can test the stoppers with the On/Off button.
O Test each stopper individually with the "On/Off" button.
Fig. 205
O Test the conveyor limit switch for each conveyor lane by reducing the width to 52mm.
18
18
18
Note: Check the correct cable laying and the correct pneumatic tubing to prevents the PCB con-
veyor and the stoppers from being damaged. 18
18
Assembly Instructions PCB Stopper Single Conveyor SIPLACE S-27HM / HS-60 / D4 / D3 / HF- / X-Series << >
Edition 06/2007 << >
229
18.1 Testing individual functions
O Take a PCB and move it through each track of the PCB conveyor with the PCB conveyor func-
tions.
O You can check the status of the stopper in the window "Input/Output Functions 5".
Fig. 206
O Calibrate the machine zero point and the position of the nozzle changer (HS-60) also if neces-
sary.
O Finally, the PCB reference corner position needs to be recalibrated for each stop position.
18
18
Assembly Instructions PCB Stopper Single Conveyor SIPLACE S-27HM / HS-60 / D4 / D3 / HF- / X-Series
Edition 06/2007
230