NR_Mechanischer_Stopper.pdf - 第191页

Assembly Instructions PCB Stopper Single Conveyor SIPLACE S-27HM / HS-60 / D4 / D 3 / HF- / X-Series Edition 06/2007 191 O Plug all the connecto rs (1 sensor , 1 sonar proximity switch, 1 solenoid valve and 1 bridge for …

100%1 / 238
Assembly Instructions PCB Stopper Single Conveyor SIPLACE S-27HM / HS-60 / D4 / D3 / HF- / X-Series
Edition 06/2007
190
14.2.3 Cable and hose laying
O Lay the bundled cables and hoses, starting with the trailing cable, under the belt for the width
adjustment. Using self-adhessive cable clamps, secure the cables parallel to the cables al-
ready running there, so that they don't touch the belt.
Route the cables back out from under the belt of the width adjustment at the height of the cable
ducts.
Fig. 168 Cable laying
O Place the pneumatic valves next to the conversion board in conveyor track 2. Shorten the
hoses to a reasonable length.
Fig. 169 Pneumatic valves
Cable laying (from right to left)
Assembly Instructions PCB Stopper Single Conveyor SIPLACE S-27HM / HS-60 / D4 / D3 / HF- / X-Series
Edition 06/2007
191
O Plug all the connectors (1 sensor, 1 sonar proximity switch, 1 solenoid valve and 1 bridge for
each conveyor track) onto the conversion board.
Fig. 170 Terminal plan for conversion board
Assembly Instructions PCB Stopper Single Conveyor SIPLACE S-27HM / HS-60 / D4 / D3 / HF- / X-Series
Edition 06/2007
192
Fig. 171 Cabling of optional PCB stopper (S27)
O Detach the blind plug from the pneumatic distributor.
Fig. 172 Supply hose
X 1 9 / 2 2
U m s e t z p l a t i n e T r a n s p o r t
C o n v e r s i o n b o a r d c o n v e y o r
0 0 3 5 9 4 2 6 - x x ( k t )
X 1 9 k t
S o n a r b e r o
S o n a r s e n s o r
0 3 0 3 2 8 7 3 - x x
S e n s o r u n t e r e P o s i t i o n
S e n s o r l o w e r p o s i t i o n
V e n t i l
V a l v e
0 3 0 3 7 8 6 1 - x x
0 3 0 3 7 8 6 0 - x x
T r a n s p o r t s p u r 1 T r a n s p o r t s p u r 2 ( n u r b e i D o p p e l t r a n s p o r t )
0 3 0 3 7 8 5 9 - x x
X 1 3 / 1 6
X 1 3 k t
X 1 8 / 2 1
X 1 8 k t
X 2 2 k t
0 3 0 3 7 8 6 1 - x x
0 3 0 3 7 8 6 0 - x x
0 3 0 3 7 8 5 9 - x x
X 1 6 k tX 2 1 k t
X 1 9 / 2 2X 1 3 / 1 6X 1 8 / 2 1
X 1 2 / 1 5
X 1 5 k t
C o d i e r b r ü c k e " S t o p p e r S p u r 1 e i n g e b a u t "
C o d i n g j u m p e r " S t o p p e r l a n e 1 i n s t a l l e d "
X 1 2 / 1 5
X 1 2 k t
0 3 0 3 7 8 6 2 - x x
X a
X a
X b
X b
0 3 0 5 3 5 6 3 - x x
0 3 0 5 3 5 6 2 - x x
X a
X a
X b
X b
0 3 0 5 3 5 6 3 - x x
0 3 0 5 3 5 6 2 - x x
X c X c
X d
X d
0 3 0 5 6 1 5 7 - x x
X d
X d
0 3 0 5 6 1 5 7 - x x
C o n v e y o r l a n e 1 C o n v e y o r l a n e 2 ( d u a l c o n v e y o r o n l y )
V e n t i l
V a l v e
S o n a r b e r o
S o n a r s e n s o r
0 3 0 3 2 8 7 3 - x x
S e n s o r u n t e r e P o s i t i o n
S e n s o r l o w e r p o s i t i o n
C o d i e r b r ü c k e " S t o p p e r S p u r 2 e i n g e b a u t "
C o d i n g j u m p e r " S t o p p e r l a n e 2 i n s t a l l e d "
0 3 0 3 7 8 6 2 - x x
Blind plug