4OM-1054-002.pdf - 第286页
4 . 2 Recognition Error IDs and Controlled Areas Basic System of Recognition Error IDs A recognition error ID is expressed by 10 digits (decimal number) as follows. AA BB C DDDDD Detailed Classification: Detail Code base…
4. Troubleshooting on Recognition System (Error ID)
4.1 Typical Description
Table 4B7
Recognition Error ID Item Description
02**1111** Component Missing Component was not found.
(Cause 1) The feeder carriage is loaded with a feeder that contains components dif-
ferent from the specified ones.
(Cause 2) The vacuum suction force is too weak.
(Cause 3) An improper nozzle is selected for the components or vice versa.
Mismatching parameters are set in the nozzle type data and the compo-
nent library data.
(Remedy 1) Check if proper components are used.
(Remedy 2) Check the vacuum pressure.
(Remedy 3) Check the parameters in the nozzle type data and the component library
data.
02 ******** Error in Outward Length Inspection Component Outward Length X is incorrect.
(Cause 1)
(Remedy 1)
(Continue to next page. )
*1 The recognition error IDs (IDs displayed in the "ERROR" window)
are described in the numerical order.
"*" will be filled with a numeric character.
*2 Described are the error name (item) and the description in the "ER-
ROR" window.
*3 Described are the causes and remedial procedures of the errors in
"*2 (Item and Description)"
The causes and remedies are correlated as follows.
(Cause 1) Æ (Remedy 1)
(Cause 2) Æ (Remedy 2)
(Cause 3) Æ (Remedy 3)
*4 This indicates that the related contents are described subsequently
on the next page.
*1
*2 *3
*2
*4
4. Troubleshooting on Recognition System
0307-005 2-168 AGS01ETRP
4.2 Recognition Error IDs and Controlled Areas
Basic System of Recognition Error IDs
A recognition error ID is expressed by 10 digits (decimal number) as
follows.
AA BB C DDDDD
Detailed Classification: Detail Code based on
Classification of Rec-
ognition Functions
Error Classification: Secondary Classifica-
tion Code of Detailed
Classification
Error Classification: Primary Classification
Code of Detailed
Classification
Classification of Recognition Functions
Classification of Recognition Functions
Table 4B8
Recognition Error IDs Classification of Recognition Functions
01 Recognition Communication and Data
Check
02 Component Recognition Function
03 P.E.C. Recognition Function
04 Nozzle Recognition Function
10 Various Teaching Functions
13 Broken Circuit of Lamp for Component Rec-
ognition
14 Lighting Control Board-to-Board Communi-
cation
4.2 Recognition Error IDs and Controlled Areas
0307-005 2-169 AGS01ETRP
4.3 Recognition Error IDs and Remedial Procedures
4.3.1 Recognition Communication and Data Errors
AA BB C DDDDD
Detail Code
Secondary Error Classification
1: Recognition Communication
Data Range Error
2: Input Data Assembly Error
3: Input Data Error
Primary Error Classification
10 to 70: Communication Commands
90: Communication Procedure
91: Command Error
92: Response Error
Classification (01) of Recognition Functions
When an error ID other than the described ones is issued, con-
tact our service personnel for some advice.
Table 4B9
Recognition Error ID Item Description
01**1***** Error in Recognition Communication Data -----
(Cause) An error was found in the recognition communication data.
(Remedy 1) Contact our service personnel for details.
0121300000 "P.E.C. Lighting #2" is not Connected! -----
(Cause) Failed in confirmation to the connection of the lighting unit for ceramic boards.
(Remedy 1) Contact our service personnel for some advice.
0130300001 Error in "Camera MAGNIFICATION X or -----
MAGNIFICATION Y" Data.
(Cause) Wrong parameters are set.
(Remedy 1) Set the correct data.
4.3 Recognition Error IDs and Remedial Procedures
0307-005 2-170 AGS01ETRP