4OM-1054-002.pdf - 第328页

(2) Frequent Pick-Up Errors on Specific Feeder Slot No. Fig. 4B33 (a) See Figs. 4B34 and 4B35 on the next page for the check- points on tape feeders. (b) When a tape feeder loaded with different components is installed, …

5.2.2 Symptom-Based Troubleshooting

(1) Frequent Failures on Specific Vacuum Nozzle

Fig. 4B32

Refer to "1. Periodic Maintenance" in "Section 1" for the clean-

ing.

5.2 Troubleshooting on Pick-Up Errors

0307-001 2-210 AGS01ETRP

(2) Frequent Pick-Up Errors on Specific Feeder Slot No.

Fig. 4B33

(a) See Figs. 4B34 and 4B35 on the next page for the check-

points on tape feeders.

(b) When a tape feeder loaded with different components is

installed, the pick-up position must be checked and the off-

set data "Feeder-B" must be cleared or modified for the

new components after program change operation because

it is prepared for the previous components.

5.2 Troubleshooting on Pick-Up Errors

0307-001 2-211 AGS01ETRP

• Checkpoints on Tape Feeder

Fig. 4B34

Fig. 4B35

5.2 Troubleshooting on Pick-Up Errors

0307-001 2-212 AGS01ETRP