4OM-1054-002.pdf - 第88页
021 1-004 1-72 AGS01ETRP 1.4 Maintenance Method (13) After the aging is completed, the following tab sheet appears. Fig. 4A84-8 (14) When the [ENABLE] button on the operation panel is pressed in two seconds after the [ON…
0211-004 1-71 AGS01ETRP
1.4 Maintenance Method
(11) Unlock the [EMERGENCY STOP] switch and press the [RESET]
button.
Press the [POWER ON] button to power the machine.
Press the [ALL] button (entitled "ZERO"). In two seconds, press
the [ENABLE] button on the operation panel.
(12) Press the [Next] button. The following sheet appears.
Fig. 4A84-7
Press the [F1] and [F2] buttons (entitled "FEEDER READY").
When the [ENABLE] button on the operation panel is pressed in
two seconds after the [ON] button (entitled "MOVE"), the aging op-
eration of the feeder carriage section starts.
0211-004 1-72 AGS01ETRP
1.4 Maintenance Method
(13) After the aging is completed, the following tab sheet appears.
Fig. 4A84-8
(14) When the [ENABLE] button on the operation panel is pressed in
two seconds after the [ON] button (entitled "MOVE"), the following
sheet appears.
Fig. 4A84-9
0211-004 1-73 AGS01ETRP
1.4 Maintenance Method
(15) Press the [EMERGENCY STOP] switch.
Open the F2 and central doors.
Clean the linear scale on the F2 side with a cotton swab soaked in
alcohol (absolute ethanol).
After the cleaning, close the F2 and central doors.
Never use any organic compounds other than alcohol.
(16) Unlock the [EMERGENCY STOP] switch and press the [RESET]
button.
Press the [POWER ON] button to power the machine.
Press the [ALL] button (entitled "ZERO"). In two seconds, press
the [ENABLE] button on the operation panel.
Press the [Next] button. The following sheet appears.
Fig. 4A84-10
(17) Press the [F1] and [F2] buttons (entitled "FEEDER READY").
Press the [ON] button (entitled "MOVE"). In two seconds, press the
[ENABLE] button on the operation panel.
Follow the same procedure as described in Step (15) to clean the
linear scale on the F1 side.