00198152-02_OM_VirtualInkspotHandling_for_SSW7xx_EN.pdf - 第14页
Virtual Inkspot Handling for SSW 7xx / Operating Manual 10/2017 Edition 14 4.2 Station Softw are Settings The inkspot file has to be configured and activated at the first stati on in the line. A template file is availabl…
Virtual Inkspot Handling for SSW 7xx / Operating Manual 10/2017 Edition
13
► Open the Station Editor.
Figure 4-2: Station Editor
► Select the Whisper down the line option for all used stations.
► Open the line object in the Line Editor.
Figure 4-3: Line Editor
► Ensure that all machines but the last one are not the End of SIPLACE station cluster.
Therefore disable this option for all machines but the last one.
Virtual Inkspot Handling for SSW 7xx / Operating Manual 10/2017 Edition
14
4.2 Station Software Settings
The inkspot file has to be configured and activated at the first station in the line. A template file is
available under C:\Sirio\Type\, file name: WhisperServerConfigurationTemplate.xml. Machine-
specific settings are assigned by the machine identification (MID) of the single machine.
► Create a copy of the template file.
► Adapt the copied file according to your requirements.
Figure 4-4: Configuring inkspot file
Configuration example
Enabled
eRECIPE means that WDTL is active if enabled in SIPLACE Pro as well (job-download).
BarcodeFileDirectory
Read and write access to the barcode files.
DefaultAction
Describes the behavior if the barcode files are not available or the barcode is not readable.
CreateFileIfNotFound
True if the file is created by the first station.
Virtual Inkspot Handling for SSW 7xx / Operating Manual 10/2017 Edition
15
Orientation
Matrix definition or inkspot file handling.
MachineSpecificActions
CreateAction: Definition which machine shall create the inkspot file (defined by the MID) and
where the file shall be saved.
MoveAction: Definition which station shall move the file to a special directory (e.g. for
traceability reasons). Usually, this is performed by the last machine.
ReadAction: Definition if the file shall be read from another shared drive.
DeleteAction: Definition if the file shall be deleted (usually performed by the last machine).
The inkspot file has to be activated in the Service view under Settings – Software options.
Figure 4-5: Activating whisper configuration file at the station
► Enable the Activate whisper configuration file option.
► Select the adapted inkspot file.