00198152-02_OM_VirtualInkspotHandling_for_SSW7xx_EN.pdf - 第9页
Virtual Inkspot Handling for SSW 7xx / Operating Manual 10/2017 Edition 9 2.3 VIH with MES and BGK from Stati on Software 70 7.0 An external M anufa cturing E xecution S ystem (MES) p rovides inkspot inf ormation (direct…
Virtual Inkspot Handling for SSW 7xx / Operating Manual 10/2017 Edition
8
Requirements
– Barcode readers have to be available in the first machine of the line with WDTL enabled or
externally with WDTL enabled if the barcode is submitted via the BGK. Barcode reader and
assembly kit depend on the conveyor mode and machine type.
– Depending on where the barcode is located, a barcode reader is needed on the top or the
bottom of the board. In case of a double-sided board with a barcode only on one side, barcode
readers are required on both sides.
Virtual Inkspot Handling for SSW 7xx / Operating Manual 10/2017 Edition
9
2.3 VIH with MES and BGK from Station Software 707.0
An external Manufacturing Execution System (MES) provides inkspot information (directly or via
mapped inkspot files) that describes the panels to be produced per board identified by a barcode.
The inkspots must not be defined in the board description and the panels are assigned according
to the board and panel names defined in SIPLACE Pro. The Windows service BoardGateKeeper
(BGK) acts as a medium between the line hardware (scanner or transportation systems) and the
line software (such as 3rd party applications, MES). The BGK inquires the inkspot information from
the MES and behaves like a preceding station to the first station in the line. The PCB barcode and
the inkspot information are transmitted via WDTL by the BGK to the first station. Thereafter, the
inkspot information is transferred via WDTL from the first station to the succeeding stations.
The barcode can be read either with a barcode reader or with the PCB camera. Thus, the
placement machine only has to be equipped with a barcode reader at the bottom. Alternatively, the
barcode can be transmitted via the BGK to the machine by using an external barcode reader.
NOTICE
As of SIPLACE Pro 15.0 and station software 711.0:
External barcode readers can be used in front of any placement machine in the line
together with the BGK. The BGK can be defined as the whisper predecessor of any
station in the line. Please refer to the Board Gate Keeper User Manual,
item no.: [00900022-xx].
To ensure that the PCB camera can read the barcode a "TOP Level Barcode" has to be defined as
barcode fiducial. If necessary, panel barcodes can also be defined as barcode fiducials.
Figure 2-2: Workflow VIH with MES and BGK
Workflow
– The 1
st
placement machine reads the PCB barcode with a barcode reader or the PCB camera.
– The PCB barcode is sent to the MES via the OIB interface of the BGK.
– The MES returns inkspot data with the panels to be produced. The panel names are defined in
SIPLACE Pro.
– The inkspot data is transferred to the next placement machine(s) by the Whisper Down The
Line option.
Virtual Inkspot Handling for SSW 7xx / Operating Manual 10/2017 Edition
10
3 System Requirements and Compatibility
The system requirements and compatibility depend on which variant of VIH is used (with XML files
directly at the first station or via the "MES" interface of the ASM Board Gate Keeper). The following
requirements apply for the two variants.
VIH with XML files VIH via the "MES" interface of the ASM
Board Gate Keeper
SIPLACE Pro 10.0 or higher SIPLACE Pro 11.1 or higher
Station Software 706.0
*)
or higher Station Software 707.0 or higher
- ASM OIB 3.2 or higher
- ASM Board Gate Keeper 1.2 or higher
SIPLACE Line Operations for each station in
the line
SIPLACE Line Operations for each station in
the line
Licenses: Licenses:
– Whispering Down the Line (part of
SIPLACE Line Operations), required for
each station in the line
– Whispering Down the Line (part of
SIPLACE Line Operations), required for
each station in the line
– Reading Barcode recognition with PCB
Camera
Notice: This license is required for each
station in the line or, alternatively to this, an
installed barcode reader.
– The SOKO "VIH XML Wrapper" provides a
higher flexibility in reading VIH files (XML,
Wafer, isk) and also in interpreting the row /
column relation. It requires one license per
line.
Barcode reader on 1
st
placement machine in
the line / each conveyor lane
Barcode reader on 1
st
placement machine /
each conveyor lane
OR
Barcode reading with PCB camera on 1
st
placement machine
Single and dual conveyor Single and dual conveyor
The Whisper Down the Line option must be
enabled for all stations.
The Whisper Down the Line option must be
enabled for all stations.
*)
The option is available from station software version 702.0 but not on GUI until 706.0.