JX-300LED_SPE_EN01.pdf - 第27页
- 23 - 6.2.2 ATF For splicing of component feed tape (t ape splicing), this tape feeder permit s a component feed during production. (1) S pecifications ① 8mm Tape type Product code Paper Emboss ed Feeding pitch Number o…
- 22 -
6.2 Tape Feeders
6.2.1 CTFR
(1) Specifications
Tape type
Product
code
Paper Embossed
Feeding pitch
Number of
pins
at the edge
Diameter of
a reel
Typical component
type
CF03HPR ○ － 0603
CF05HPR ○ － 1005
CF08HER － ○
2mm
Two-terminal
diode
CF081PR ○ － 1608, 2012, 3216
CF081ER － ○
Φ180mm
SOT
CF8L1PR ○ － 1608, 2012, 3216
CF8L1ER － ○
4mm
Two
Φ180 −
Φ380mm
SOT
CN05HP
R
○ － 1005
CN08HE
R
－ ○
2mm
Two-terminal
diode
CN081CR ○ ○
Φ180mm
1608, 2012, 3216
CN8L1CR ○ ○
4mm
One
Φ180 −
Φ380mm
1608, 2012, 3216
* For a tape feeder designed for both paper and embossed paper, contact our sales person.
* Use a tape feeder whose supported component sizes and tape specifications conform to the
JIS C0806-3:1999 and IEC 60286-3:2007.
(2) Common specifications
C*0***R L=602mm, H=208mm, W=16.2mm
1 Dimensions
C*8L1*R L=683mm, H=431mm, W=16.5mm
C*0***R 1.2kg (Excluding a reel)
2 Mass
C*8L1*R 1.9kg (Excluding a reel)
3 Component transport method Ratchet drive system
- 23 -
6.2.2 ATF
For splicing of component feed tape (tape splicing), this tape feeder permits a component
feed during production.
(1) Specifications
① 8mm
Tape type
Product
code
Paper Embossed
Feeding
pitch
Number of pins
at the edge
Diameter
of a reel
Typical component type
AF05HP ○ － 1005
AF08HE － ○
2mm
Two-terminal diode
AF081P ○ － 1608, 2012, 3216
AF081E － ○
4mm
Two
SOT
AN05HP ○ － 1005
AN08HE － ○
2mm
Two-terminal diode
AN081P ○ － 1608, 2012, 3216
AN081E － ○
4mm
One
Φ180mm
SOT
* For a tape feeder designed for both paper and embossed paper, contact our sales person.
* The component size and tape specifications conform to JIS C0806-3:1999 and IEC 60286-3:2007.
② 12mm to 24mm
Product code Feed pitch
Pick position
(Y direction)
Applicable
component emboss
width
Applicable
component
emboss depth
AF121S 4mm
AF122S 8mm
AF123S 12mm
AF12FS 4/8/12mm
AF12NS 4/8/12mm
8.3 mm or less
AF161S 4mm
AF162S 8mm
AF163S 12mm
AF16FS 4/8/12/16mm
AF16NS 4/8/12mm
12.2 mm or less
AF242S 8mm
AF243S 12mm
AF244S 16mm
AF245S 20mm
AF246S 24mm
AF24FS 8/12/16/20/24mm
AF24NS 8/12mm
132mm
AF24FS-OP 8/12/16/20/24mm 114 mm
20.2 mm or less
17 mm or less
* The component size and tape specifications conform to JIS C0806-3:1999 and IEC 60286-3:2007.
- 24 -
(2) Common specifications
8mm 12mm/16mm 24mm
1 Dimensions L=645mm,
H=213mm,
W=16.8mm
L=693mm,
H=472mm,
W=31.5mm
L=693mm,
H=472mm,
W=40mm
2 Mass (Excluding a reel) 1.8 kg or less 2.45kg or less 2.6kg or less
3 Component transport
method
Ratchet drive system
(3) Options
① Embossed tape spacer
To improve the feed and pickup stability of the carrier tape for the emboss
component made of a soft and fragile material, this spacer is installed in the emboss
groove of the feeder to support the bottom surface of the carrier tape.
A type for 8 mm feeder, type for both 12 mm and 16 mm feeders, and type for 24
mm feeder are available.
② Joint tape splicing jig (8mm only)
When you use a JUKI designated joint tape, this jig allows you to paste a joint tape
with glue easily.
③ Joint tape
This is a tape that splices an old tape reel and a new tape reel.
A dedicated type for each tape width is available.
④ Scissors (Tape cutting jig A, and B)
A positional adjustment between the tape feeder used during the production and a
new tape feeder to be connected can be accurately and quickly made by cutting the
tapes with dedicated scissors when they are spliced.
- Tape cutting jig A: Available for feed pitch (4, 12, 20, 28, 36, 44, 52).
- Tape cutting jig B: Available for feed pitch (8, 16, 24, 32, 40, 48, 56).