JX-300LED_SPE_EN01.pdf - 第29页
- 25 - 6.2.3 FTF/FTFR (1) S pecification table ① FTF (12 mm, 16 mm, 24 mm, and 72 mm) Applicab le component Product code Feed pitch Pick position (Y direction) Emboss width Emboss depth FF121S 4mm FF122S 8mm FF123S 12mm …
- 24 -
(2) Common specifications
8mm 12mm/16mm 24mm
1 Dimensions L=645mm,
H=213mm,
W=16.8mm
L=693mm,
H=472mm,
W=31.5mm
L=693mm,
H=472mm,
W=40mm
2 Mass (Excluding a reel) 1.8 kg or less 2.45kg or less 2.6kg or less
3 Component transport
method
Ratchet drive system
(3) Options
① Embossed tape spacer
To improve the feed and pickup stability of the carrier tape for the emboss
component made of a soft and fragile material, this spacer is installed in the emboss
groove of the feeder to support the bottom surface of the carrier tape.
A type for 8 mm feeder, type for both 12 mm and 16 mm feeders, and type for 24
mm feeder are available.
② Joint tape splicing jig (8mm only)
When you use a JUKI designated joint tape, this jig allows you to paste a joint tape
with glue easily.
③ Joint tape
This is a tape that splices an old tape reel and a new tape reel.
A dedicated type for each tape width is available.
④ Scissors (Tape cutting jig A, and B)
A positional adjustment between the tape feeder used during the production and a
new tape feeder to be connected can be accurately and quickly made by cutting the
tapes with dedicated scissors when they are spliced.
- Tape cutting jig A: Available for feed pitch (4, 12, 20, 28, 36, 44, 52).
- Tape cutting jig B: Available for feed pitch (8, 16, 24, 32, 40, 48, 56).
- 25 -
6.2.3 FTF/FTFR
(1) Specification table
① FTF (12 mm, 16 mm, 24 mm, and 72 mm)
Applicable component
Product code Feed pitch
Pick position
(Y direction)
Emboss
width
Emboss
depth
FF121S 4mm
FF122S 8mm
FF123S 12mm
FF12FS 4/8/12mm
FF12NS 4/8/12mm
8.3mm or
less
FF161S 4mm
FF162S 8mm
FF163S 12mm
FF16FS 4/8/12/16mm
FF16NS 4/8/12mm
12.2mm or
less
6.5mm or
less
FF242S 8mm
FF243S 12mm
FF244S 16mm
FF245S 20mm
FF246S 24mm
FF24FS 8/12/16/20/24mm
FF24NS 8/12mm
20.2mm or
less
FF724S 12/16mm
FF728S 12/16/20/24/28/32mm
132mm
62mm or
less
10.5mm or
less
FF12** L =693mm, H =472mm, W=31.5mm
FF16** L =693mm, H =472mm, W=31.5mm
FF24** L =693mm, H =472mm, W=40.0mm
Dimensions
FF72** L =693mm, H =472mm, W=89.2mm
Mass
(Excluding a reel)
FF12**: 2.45kg , FF16**: 2.45kg , FF24**: 2.6kg,
FF72**: 5.1kg
Component transport
method
Ratchet drive system
* The component size and tape specifications conform to JIS C0806-3:1999 and IEC 60286-3:2007.
- 26 -
② FTFR (32 mm, 44 mm, and 56 mm)
Applicable
component
Product code Feed pitch
Pick position
(Y direction)
Emboss
width
Emboss
depth
FF323R 12mm
FF324R 16mm
FF32FR 8/12/16/20/24mm
132mm
FF32FR-OP 8/12/16/20/24/28/32mm 114mm
23.5mm
or less
FF443R 12mm
FF444R 16mm
FF44FR 8/12/16/20/24mm
128mm
FF44FR-OP 8/12/16/20/24/28/32/36/40/44mm 114mm
33.8mm
or less
FF564R 12/16mm 128mm
FF568R 12/16/20/24/28/32mm 114mm
FF56FR 8/12/16/20/24mm 128mm
FF56FR-OP 8/12/16/20/24/28/32/36/40/44/48/56mm 114mm
46.0mm
or less
25mm or
less
Dimensions
L =693mm, H =472mm
W= FTFR32**: 47.7mm, FTFR44**: 61.6mm, FTFR56**: 66.0mm
Mass
(Excluding a reel)
FTFR32**: 3.2kg, FTFR44**: 3.5kg, FTFR56**: 3.8kg
Component
transport method
Ratchet drive system
* The component size and tape specifications conform to JIS C0806-3:1999 and IEC
60286-3:2007.
(2) Options
① Emboss spacer (FTFR only)
When the component width and length are large and the tape depth is small, the
posture stability at component pickup can be improved by placing the spacer at the
component pickup position of the tape feeder.
The usable emboss depth is 1.0 mm to 8.0 mm.