JX-300LED_SPE_EN01.pdf - 第30页
- 26 - ② FTFR (32 mm, 44 mm, and 56 mm) Applicable component Product code Feed pitch Pick position (Y direction) Emboss width Emboss depth FF323R 12mm FF324R 16mm FF32FR 8/12/16/20/24mm 132mm FF32FR-OP 8/12/16/20/24/28/3…
- 25 -
6.2.3 FTF/FTFR
(1) Specification table
① FTF (12 mm, 16 mm, 24 mm, and 72 mm)
Applicable component
Product code Feed pitch
Pick position
(Y direction)
Emboss
width
Emboss
depth
FF121S 4mm
FF122S 8mm
FF123S 12mm
FF12FS 4/8/12mm
FF12NS 4/8/12mm
8.3mm or
less
FF161S 4mm
FF162S 8mm
FF163S 12mm
FF16FS 4/8/12/16mm
FF16NS 4/8/12mm
12.2mm or
less
6.5mm or
less
FF242S 8mm
FF243S 12mm
FF244S 16mm
FF245S 20mm
FF246S 24mm
FF24FS 8/12/16/20/24mm
FF24NS 8/12mm
20.2mm or
less
FF724S 12/16mm
FF728S 12/16/20/24/28/32mm
132mm
62mm or
less
10.5mm or
less
FF12** L =693mm, H =472mm, W=31.5mm
FF16** L =693mm, H =472mm, W=31.5mm
FF24** L =693mm, H =472mm, W=40.0mm
Dimensions
FF72** L =693mm, H =472mm, W=89.2mm
Mass
(Excluding a reel)
FF12**: 2.45kg , FF16**: 2.45kg , FF24**: 2.6kg,
FF72**: 5.1kg
Component transport
method
Ratchet drive system
* The component size and tape specifications conform to JIS C0806-3:1999 and IEC 60286-3:2007.
- 26 -
② FTFR (32 mm, 44 mm, and 56 mm)
Applicable
component
Product code Feed pitch
Pick position
(Y direction)
Emboss
width
Emboss
depth
FF323R 12mm
FF324R 16mm
FF32FR 8/12/16/20/24mm
132mm
FF32FR-OP 8/12/16/20/24/28/32mm 114mm
23.5mm
or less
FF443R 12mm
FF444R 16mm
FF44FR 8/12/16/20/24mm
128mm
FF44FR-OP 8/12/16/20/24/28/32/36/40/44mm 114mm
33.8mm
or less
FF564R 12/16mm 128mm
FF568R 12/16/20/24/28/32mm 114mm
FF56FR 8/12/16/20/24mm 128mm
FF56FR-OP 8/12/16/20/24/28/32/36/40/44/48/56mm 114mm
46.0mm
or less
25mm or
less
Dimensions
L =693mm, H =472mm
W= FTFR32**: 47.7mm, FTFR44**: 61.6mm, FTFR56**: 66.0mm
Mass
(Excluding a reel)
FTFR32**: 3.2kg, FTFR44**: 3.5kg, FTFR56**: 3.8kg
Component
transport method
Ratchet drive system
* The component size and tape specifications conform to JIS C0806-3:1999 and IEC
60286-3:2007.
(2) Options
① Emboss spacer (FTFR only)
When the component width and length are large and the tape depth is small, the
posture stability at component pickup can be improved by placing the spacer at the
component pickup position of the tape feeder.
The usable emboss depth is 1.0 mm to 8.0 mm.
- 27 -
6.2.4 Calibration jig for the feeder with a monitor
This Jig is for calibrating a feeder while monitoring the component pick-up position with a
CCD camera. If you check and calibrate the pick position on a regular basis, you can
maintain the stable pick-up capability.
(1) Specifications
1 Power supply Select 100 V - 120 V or 200 V - 240 V.
2 Outer dimension L=290mm, H=480mm, W=157mm
3 Mass - Adjustment jig main unit: 12 kg or less
(including the CCD camera and lens section)
- Master feeder: 2 kg
- Monitor: 4 kg
(2) Environment
① During operation
- Temperature: 10℃ to 35℃
- Accuracy guaranty temperature: 20℃ to 25℃
- Humidity: 30％ to 80％RH (No condensation)
- Altitude: 1,000m or less
② Transportation and storage
- Temperature: -15℃ to 70℃
- Humidity: 20％ to 95％RH (No condensation)
(3) Configuration
Standard
- Adjustment jig main unit - Master feeder
- CCD camera (including a lens) - Light
- Power supply - Monitor
- Jig tape - Adjustment tool
(4) Applicable feeders
- ATF: 8 mm to 24mm
- CTF: 8 mm
- CTFR: 8 mm
- FTF: 8 mm to 72 mm, FTFR: 32mm to 56mm
- NTF: 8 mm to 56 mm
＊
Note 1
- BF: BF10AS, BF11AS, BF12BS, BF12CS, BF25CS, BF28CS and BF28RS
Note 1: One of type of 8mm and type of 12 mm to 56 mm do not have the X-direction
adjustment.