JX-300LED_SPE_EN01.pdf - 第3页
T able of Content s 1. General ..................................................................................................................... .. 1 2. Features ......................................................…
Important
(1) No part of this document may be copied or reproduced without the prior
permission of JUKI Corporation. (Including software and program)
(2) The contents of this document are subject to change without notice.
(3) This manual is prepared with extreme care. However, if you have any question
or find any error or omission in writing, contact our dealer or JUKI Corporation.
(4) JUKI Corporation shall disclaim all the responsibility for any trouble resulting
from the user's abnormal operation regardless of Item (3).
(5) Microsoft,Windows are registered trademarks or trademarks of Microsoft
Corporation in the United States and /or other countries.
The company names and product names mentioned in this document are
generally registered trademarks or trademarks of the respective companies.
Table of Contents
1. General .......................................................................................................................1
2. Features......................................................................................................................1
3. System Configuration ...............................................................................................3
3.1 JX-300LED System Configuration........................................................................3
4. Specifications ............................................................................................................6
4.1 Basic Specifications..............................................................................................6
4.2 Facility Specifications ...........................................................................................7
4.2.1 Supply facilities and environmental conditions ..............................................7
4.2.2 Outside dimensions (except for the largest projections) ................................8
4.2.3 Mass of the main unit.....................................................................................8
4.3 Component Placement Cycle Time
(Number of Components Placed for One Hour) ..................................................9
4.4 Nozzles...............................................................................................................10
4.5 Applicable Components......................................................................................11
4.5.1 Applicable component sizes ........................................................................11
4.6 Component Placement Accuracy at X, Y and θ..................................................11
4.7 Applicable PWBs ................................................................................................12
4.7.1 PWBs transport direction .............................................................................12
4.7.2 PWB specifications ......................................................................................12
4.7.3 Unavailable area for placing components on a board..................................13
4.7.4 Unavailable area for setting a support pin ...................................................13
4.7.5 Area of the topside and the rear side of a board
where components can be placed..............................................................14
4.7.6 Function for correcting the PWB positions...................................................15
5. Standard Functions And Optional Functions .......................................................18
5.1 Standard Functions ............................................................................................18
5.1.1 Support up to 1,200 mm as the X axis of a board........................................18
5.1.2 Feeder float detecting sensor (Front side only) ...........................................18
5.2 Optional Functions..............................................................................................18
5.2.1 Height Measurement System (HMS) (Factory-set option) ...........................18
5.2.2 Bad mark reader (Factory-set option) ..........................................................18
5.2.3 Liquid crystal touch panel ............................................................................19
5.2.4 Feeder position indicator function
(FPI, Factory-set option) (Front side only)
....19
5.2.5 Longer-sized PWB in X axis (X-dimension:1,500 mm)
(Front side only)
........19
5.2.6 Lighting unit for solder recognition (Factory-set option)...............................19
5.2.7 Component quantity control (Option) ...........................................................19
5.2.8 Handheld operating device (HOD: Factory-set option) ................................19
5.2.9 Flexible calibration system (FCS: Option)....................................................19
5.2.10 IN/OUT buffer (Option)...............................................................................20
5.2.11 Support table (Factory-set Option).............................................................20
5.2.12 Tray Station (Factory-set option) ...............................................................20
5.2.13 Air coupler (Piping joint) (Option)...............................................................20
5.2.14 Software to support production (Option) ....................................................20
6. Optional Feeders .....................................................................................................21
6.1 Maximum Number of Feeders Available on the Machine ...................................21
6.2 Tape Feeders .....................................................................................................22
6.2.1 CTFR ...........................................................................................................22
6.2.2 ATF ..............................................................................................................23
6.2.3 FTF/FTFR ....................................................................................................25
6.2.4 Calibration jig for the feeder with a monitor .................................................27
6.2.5 Feeder setup stand......................................................................................28
6.3 Stick Feeder .......................................................................................................29
6.4 TR Series............................................................................................................30
6.4.1 Overview ......................................................................................................30
6.4.2 Specifications...............................................................................................30
6.4.3 Options.........................................................................................................31
7. Control System ........................................................................................................32
7.1 Control ................................................................................................................32
7.1.1 Saving a program.........................................................................................32
7.1.2 Limit of a production program ......................................................................32
7.2 Production Mode ................................................................................................32
8. Other Specifications................................................................................................33
8.1 Electrical interfaces ............................................................................................33
8.1.1 Kinds and meanings of electrical signals.....................................................33
8.2 Specifications for Connections between the Front and Rear Devices................34
8.2.1 Specifications of the Connecting Cable .......................................................34
8.3 Data Interface .....................................................................................................34
9. Safety Specifications...............................................................................................35
9.1 Standards Specifications ....................................................................................35
10. Reliability Specifications ......................................................................................35
10.1 Reliability of the machine (Devices)..................................................................35