JX-300LED_SPE_EN01.pdf - 第31页
- 27 - 6.2.4 Calibration jig for th e feeder with a monitor This Jig is for calibrating a feeder while monitoring the component pick-up position wit h a CCD camera. If you check and calibrate the pi ck position on a regu…
- 26 -
② FTFR (32 mm, 44 mm, and 56 mm)
Applicable
component
Product code Feed pitch
Pick position
(Y direction)
Emboss
width
Emboss
depth
FF323R 12mm
FF324R 16mm
FF32FR 8/12/16/20/24mm
132mm
FF32FR-OP 8/12/16/20/24/28/32mm 114mm
23.5mm
or less
FF443R 12mm
FF444R 16mm
FF44FR 8/12/16/20/24mm
128mm
FF44FR-OP 8/12/16/20/24/28/32/36/40/44mm 114mm
33.8mm
or less
FF564R 12/16mm 128mm
FF568R 12/16/20/24/28/32mm 114mm
FF56FR 8/12/16/20/24mm 128mm
FF56FR-OP 8/12/16/20/24/28/32/36/40/44/48/56mm 114mm
46.0mm
or less
25mm or
less
Dimensions
L =693mm, H =472mm
W= FTFR32**: 47.7mm, FTFR44**: 61.6mm, FTFR56**: 66.0mm
Mass
(Excluding a reel)
FTFR32**: 3.2kg, FTFR44**: 3.5kg, FTFR56**: 3.8kg
Component
transport method
Ratchet drive system
* The component size and tape specifications conform to JIS C0806-3:1999 and IEC
60286-3:2007.
(2) Options
① Emboss spacer (FTFR only)
When the component width and length are large and the tape depth is small, the
posture stability at component pickup can be improved by placing the spacer at the
component pickup position of the tape feeder.
The usable emboss depth is 1.0 mm to 8.0 mm.
- 27 -
6.2.4 Calibration jig for the feeder with a monitor
This Jig is for calibrating a feeder while monitoring the component pick-up position with a
CCD camera. If you check and calibrate the pick position on a regular basis, you can
maintain the stable pick-up capability.
(1) Specifications
1 Power supply Select 100 V - 120 V or 200 V - 240 V.
2 Outer dimension L=290mm, H=480mm, W=157mm
3 Mass - Adjustment jig main unit: 12 kg or less
(including the CCD camera and lens section)
- Master feeder: 2 kg
- Monitor: 4 kg
(2) Environment
① During operation
- Temperature: 10℃ to 35℃
- Accuracy guaranty temperature: 20℃ to 25℃
- Humidity: 30％ to 80％RH (No condensation)
- Altitude: 1,000m or less
② Transportation and storage
- Temperature: -15℃ to 70℃
- Humidity: 20％ to 95％RH (No condensation)
(3) Configuration
Standard
- Adjustment jig main unit - Master feeder
- CCD camera (including a lens) - Light
- Power supply - Monitor
- Jig tape - Adjustment tool
(4) Applicable feeders
- ATF: 8 mm to 24mm
- CTF: 8 mm
- CTFR: 8 mm
- FTF: 8 mm to 72 mm, FTFR: 32mm to 56mm
- NTF: 8 mm to 56 mm
＊
Note 1
- BF: BF10AS, BF11AS, BF12BS, BF12CS, BF25CS, BF28CS and BF28RS
Note 1: One of type of 8mm and type of 12 mm to 56 mm do not have the X-direction
adjustment.
- 28 -
6.2.5 Feeder setup stand
This is platform for attaching a tape reel onto a tape feeder. Since it allows you to attach a
tape reel on a tape feeder while keeping the tape feeder in position, the tape attachment
capability is improved and it also functions to prevent a tape feeder from falling.
Two types of packages of feeder setup stand designed for a mechanical feeder are
available in response to applications.
Type Application
Feeder setup stand
(With a stand)
Equipped with pedestal stand: can be installed as desired.
Feeder setup stand
(without a stand)
A user has to fix the platform on a table or similar substance with
screws.
(1) Specifications
Platform equipped with a stand Platform without a stand
- When including a feeder support section
L = 666 mm
W = 400 mm
H = 977 ± 50 mm
Outer
dimensions
- Base side only
L = 550 mm
W = 400 mm
H = 977 ± 50 mm
L = 187 mm
W = 127 mm
H = 187 mm
Mass 20 kg 1.5 kg
* The outer dimensions and mass described above indicate values to be applied when any feeder
is not mounted on the platform.