JX-300LED_SPE_EN01.pdf - 第28页
- 24 - (2) Common specifications 8mm 12mm/16mm 24mm 1 Dimensions L=645mm, H=213mm, W=16.8mm L=693mm, H=472mm, W=31.5mm L=693mm, H=472mm, W=40mm 2 Mass (Excluding a reel) 1.8 kg o r less 2.45kg or less 2.6kg o r less 3 Co…
- 23 -
6.2.2 ATF
For splicing of component feed tape (tape splicing), this tape feeder permits a component
feed during production.
(1) Specifications
① 8mm
Tape type
Product
code
Paper Embossed
Feeding
pitch
Number of pins
at the edge
Diameter
of a reel
Typical component type
AF05HP ○ － 1005
AF08HE － ○
2mm
Two-terminal diode
AF081P ○ － 1608, 2012, 3216
AF081E － ○
4mm
Two
SOT
AN05HP ○ － 1005
AN08HE － ○
2mm
Two-terminal diode
AN081P ○ － 1608, 2012, 3216
AN081E － ○
4mm
One
Φ180mm
SOT
* For a tape feeder designed for both paper and embossed paper, contact our sales person.
* The component size and tape specifications conform to JIS C0806-3:1999 and IEC 60286-3:2007.
② 12mm to 24mm
Product code Feed pitch
Pick position
(Y direction)
Applicable
component emboss
width
Applicable
component
emboss depth
AF121S 4mm
AF122S 8mm
AF123S 12mm
AF12FS 4/8/12mm
AF12NS 4/8/12mm
8.3 mm or less
AF161S 4mm
AF162S 8mm
AF163S 12mm
AF16FS 4/8/12/16mm
AF16NS 4/8/12mm
12.2 mm or less
AF242S 8mm
AF243S 12mm
AF244S 16mm
AF245S 20mm
AF246S 24mm
AF24FS 8/12/16/20/24mm
AF24NS 8/12mm
132mm
AF24FS-OP 8/12/16/20/24mm 114 mm
20.2 mm or less
17 mm or less
* The component size and tape specifications conform to JIS C0806-3:1999 and IEC 60286-3:2007.
- 24 -
(2) Common specifications
8mm 12mm/16mm 24mm
1 Dimensions L=645mm,
H=213mm,
W=16.8mm
L=693mm,
H=472mm,
W=31.5mm
L=693mm,
H=472mm,
W=40mm
2 Mass (Excluding a reel) 1.8 kg or less 2.45kg or less 2.6kg or less
3 Component transport
method
Ratchet drive system
(3) Options
① Embossed tape spacer
To improve the feed and pickup stability of the carrier tape for the emboss
component made of a soft and fragile material, this spacer is installed in the emboss
groove of the feeder to support the bottom surface of the carrier tape.
A type for 8 mm feeder, type for both 12 mm and 16 mm feeders, and type for 24
mm feeder are available.
② Joint tape splicing jig (8mm only)
When you use a JUKI designated joint tape, this jig allows you to paste a joint tape
with glue easily.
③ Joint tape
This is a tape that splices an old tape reel and a new tape reel.
A dedicated type for each tape width is available.
④ Scissors (Tape cutting jig A, and B)
A positional adjustment between the tape feeder used during the production and a
new tape feeder to be connected can be accurately and quickly made by cutting the
tapes with dedicated scissors when they are spliced.
- Tape cutting jig A: Available for feed pitch (4, 12, 20, 28, 36, 44, 52).
- Tape cutting jig B: Available for feed pitch (8, 16, 24, 32, 40, 48, 56).
- 25 -
6.2.3 FTF/FTFR
(1) Specification table
① FTF (12 mm, 16 mm, 24 mm, and 72 mm)
Applicable component
Product code Feed pitch
Pick position
(Y direction)
Emboss
width
Emboss
depth
FF121S 4mm
FF122S 8mm
FF123S 12mm
FF12FS 4/8/12mm
FF12NS 4/8/12mm
8.3mm or
less
FF161S 4mm
FF162S 8mm
FF163S 12mm
FF16FS 4/8/12/16mm
FF16NS 4/8/12mm
12.2mm or
less
6.5mm or
less
FF242S 8mm
FF243S 12mm
FF244S 16mm
FF245S 20mm
FF246S 24mm
FF24FS 8/12/16/20/24mm
FF24NS 8/12mm
20.2mm or
less
FF724S 12/16mm
FF728S 12/16/20/24/28/32mm
132mm
62mm or
less
10.5mm or
less
FF12** L =693mm, H =472mm, W=31.5mm
FF16** L =693mm, H =472mm, W=31.5mm
FF24** L =693mm, H =472mm, W=40.0mm
Dimensions
FF72** L =693mm, H =472mm, W=89.2mm
Mass
(Excluding a reel)
FF12**: 2.45kg , FF16**: 2.45kg , FF24**: 2.6kg,
FF72**: 5.1kg
Component transport
method
Ratchet drive system
* The component size and tape specifications conform to JIS C0806-3:1999 and IEC 60286-3:2007.