JX-300LED_SPE_EN01.pdf - 第8页
- 4 - Machine style JX-300LED Remarks Operation system ○ Liquid crystal display (with touch panel) ○ Touch panel ● *1 Keyboard, track ball ○ SSD ○ LAN port Ethernet ○ USB port ○ Rear-side operation unit - HOD ● *1 DVD/CD…
- 3 -
3. System Configuration
3.1 JX-300LED System Configuration
○: Equipped as standard ●: Option - : No setting
Machine style JX-300LED
Remarks
Basic configuration
Head unit
○
Laser recognition head(LNC60)
○
Offset collection camera L(OCC L)
○
Height measuring unit(HMS）
●*1
Bad mark reader(BMR)
●*1
Placement Monitor －
Power supply unit
○
Emergency stop button
○
Uninterruptible Power-supply System (UPS)
●*1
Electrical leakage breaker
●*1
I/O control unit
○
Motor control unit
○
X-Y control unit
○
Interior/exterior finish and equipment
○
Signal light (with buzzer)
○
Super foot
●*1
Caster
●*1
Pneumatic device piping system
○
Air regulator
○
Vacuum pump
●*1
Main line filter
●*1/○*2
Air coupler (Piping joint)
●*1
PWB conveyor unit
○
Board transport reference
○
Front reference
○
Rear reference －
Conveyor height 900 mm
○
Conveyor height 950 mm －
IN/OUT buffer (3 buffers)
●*1
For a board size up to 410 mm
in X axis
Placement station
○
Shape reference
○
Pin reference －
Support table unit
●*1
Including 16 support pins
Auto PWB width adjustment unit
●*1
Standard X-direction board size:
○
Up to 1,200mm in X-axis
Longer-sized board in X-axis
●*1
Up to 1,500mm in X-axis
Lighting unit of solder recognition
●*1
Component quantity control
●
- 4 -
Machine style JX-300LED
Remarks
Operation system
○
Liquid crystal display (with touch panel)
○
Touch panel ●*1
Keyboard, track ball ○
SSD ○
LAN port Ethernet ○
USB port ○
Rear-side operation unit
-
HOD ●*1
DVD/CD-ROM drive(USB) ●
FD drive(USB） ●
Equipment device
Feeder float sensor ○ Front side only
Automatic tool change unit(ATC) ○
Large-shape component scrap box －
Flexible calibration system(FCS） ○
FCS adjustment jig ●
Feeder position indicator(FPI) ●*1 Front side only
Component verification(CVS) －
Coplanarity －
Simplified load control －
Solder print recognition placement position correction －
Production support system
Flexline DB ○
External programming unti(EPU) ●
Flexline CAD ●
Host Line Computer (HLC) －
・IS －
Floor productivity improvement
・IFS-NX －
White list type anti-virus software ○
Feeder bank (Mechanical type)
Mechanical feeder bank (fixed type, Not on the rear side) ○
Mechanical feeder bank (trolley type) －
Trolley for mechanical feeder －
Intelli trolley(RFID) for mechanical feeder －
Connector bracket －
IC collection belt unit －
Component supply unit
-Tape feeder/bulk feeder ●
-Stick feeder ●
-Stacked stick feeder －
- 5 -
Machine style JX-300LED
Remarks
Tray supply unit
-MTS ●*3 (TR5SNR only)
-TR5S attachment uit ●*1*3
-Tray station ●*1 (Rear side only)
-MTC －
-DTS －
-Tray holder ●
Tape reel mounting base ●
Automatic tape cutter －
Trash box ●
*1 This option is a factory-set option.
*2 The English specification and the Chinese specifications are supported as standard.
*3 To attach an MTS on the machine, you have to install [TR5S attachment unit] on the rear of the main
unit.