00194591-01.pdf - 第38页
3 In stal latio n Installation Guide SIPLACE Setup Center 3.2 Installation of SIPLACE Setup Center and Possible Setu p Types Edition 03/2005 EN 38 3.2.3.8 Setting of the Scanner Address Each scanner requires a unique add…
Installation Guide SIPLACE Setup Center 3 Installation
Edition 03/2005 EN 3.2 Installation of SIPLACE Setup Center and Possible Setup Types
37
3
3
3
3
3
9
Two-Ways
Display-off Timeout
9
0
3 Installation Installation Guide SIPLACE Setup Center
3.2 Installation of SIPLACE Setup Center and Possible Setup Types Edition 03/2005 EN
38
3.2.3.8 Setting of the Scanner Address
Each scanner requires a unique address.
→Enter the following barcode and scan the four digits for the scanner address, e.g. '0''0''0''1'.
3
Four digits for the DRAGON ™ M Address (from 0000 to 1999)
3
3
3
Set Radio Address
BarcodeTypeCode93
Exit and Save configuration
Installation Guide SIPLACE Setup Center 3 Installation
Edition 03/2005 EN 3.2 Installation of SIPLACE Setup Center and Possible Setup Types
39
Aiming pointer (standard is 300 ms). The aiming pointer holds the laser beam on a single spot
before reading a barcode.
3
3
3
The scanner is now ready configured. Now it needs to be bound to a RF station as described
below.
3
300ms
500ms
1sec
Aiming system disabled