00198281-02_JG SmartFeeder 24-104 mm X_EN.pdf - 第31页
Splicing - Splicing a Wide Tape 31 www.asm-smt.com 2.5 Splicing a Wide Tape 1. Place the end of the tape over half of the rivet and then close the right-hand locking of the splicing tool, as shown in the dia- gram. 2. Fi…
Splicing - Splicing Narrow Tapes
30
www.asm-smt.com
1. Remove one half of the protector strip.
Attention:
Do not touch the sticky surface!
2. Lay the adhesive strip on top of the com-
ponent tape and press firmly
3. Remove carefully the second half of the
protector strip and press firmly on the ad-
hesive strip.
4. To finish splicing the tape, press the spli-
cing tool until this releases itself.
Open the locking of the splicing tool afterwards
and remove the tape.
Splicing - Splicing a Wide Tape
31
www.asm-smt.com
2.5 Splicing a Wide Tape
1. Place the end of the tape over half of the
rivet and then close the right-hand locking
of the splicing tool, as shown in the dia-
gram.
2. First splice one side of the tape, as de-
scribed for the narrow tape. Use a wide
adhesive strip!
3. Place a new rivet into the splicing tool,
turn the tape over and splice the perfora-
tion onto the other side.
Splicing - Splicing with the Multi-frame Tape Splice Gripper
32
www.asm-smt.com
2.6 Splicing with the Multi-frame Tape Splice Gripper
You first need to "load" the multi-frame tape
splice gripper with a strip of splicing rivets.
1. Open the multi-frame tape splice gripper
press the slide back, as far as the stop-
per.
2. Place a strip of splicing rivets into the
multi-frame tape splice gripper, as shown
in the diagram.
3. Slide the strip of splicing rivets forwards,
as far as the stopper.
4. Press on the catch to release the slide, as
shown in the diagram.
The multi-frame tape splice gripper is now
ready for use.