00198281-02_JG SmartFeeder 24-104 mm X_EN.pdf - 第9页

Operating the Feeder Module - Overview of the Menus 9 www.asm-smt.com 1.5 Overview of the Menus 1. Main Menu 2. Pickup position menu (PICK POSITION) 3. Pitch menu (PITCH) 4. Transport speed menu (SPEED) With the gray SET…

Operating the Feeder Module - Operator panel

www.asm-smt.com

1.4 Operator panel

1. Display (7-segment display)

2 characters above, 2 characters below

2. FORWARDS button

3. BACKWARDS button

4. FOIL button

5. SET button

Operating the Feeder Module - Overview of the Menus

www.asm-smt.com

1.5 Overview of the Menus

1. Main Menu

2. Pickup position menu (PICK POSITION)

3. Pitch menu (PITCH)

4. Transport speed menu (SPEED)

With the gray SET button you switch to the

next menu, with the yellow FOIL button to the

previous menu.

Operating the Feeder Module - Feeder Setup and Log On

www.asm-smt.com

1.6 Feeder Setup and Log On

1. Place the feeder module on the

changeover table.



Attention:

When placing the feeder module, make

sure that the slider guide of the feeder

module fits properly in the Omega profile

of the track on the changeover table.

If the feeder module is not placed prop-

erly, the pickup window can be damaged

during insertion.

2. Carefully push the feeder module into the

changeover table, as far as the stop.

3. If the removal handle is still out, push it

into the feeder module.

4. The feeder is now logged on.