ENA-X and ENA Series Vector Network Analyzers.pdf - 第41页
41 Accessories , Calibration Options Option Number Description Additional I nformation E5092A - 1CM Rack mount kit only Adds a rack mount kit for use wit hout handles . E5092A - 1CN Front handle ki t only Adds a front ha…
40
E5092A Configurable Multiport Test Set
The E5092A configurable multiport test set is offered for use with the 4-port E5080B or E5081A to extend
the number of test ports. Multiport measurements from 50 MHz to 20 GHz can be made by connecting the
optional interconnect semi-rigid cables to the E5092A's front panel.
Test Set Options
Choose Option 020. Option 020 is the only test set option for the E5092A.
Option Number
Description
Additional Information
E5092A-020
20 GHz switching test set
Up to 22-port or 10-port full crossbar
measurements.
Cable and Adapter Options
Choose one of the interconnect cable and adapter set for your 4-port E5080B ENA.
Option Number
1, 2
Description
Additional Information
E5092A-09B
Cable and adapters for connection to
E5080B Option 440/460/490/4D0/4H0
Adds SMA semi-rigid cables and type-N-to-
SMA adapters for connection to the E5080B
with type-N connectors.
E5092A-20B
Cable and adapters for connection to
E5080B Option 4D0/4K0/4L0
Adds SMA semi-rigid cables and 3.5 mm-to-
3.5 mm adapters for connection to the
E5080B with 3.5-mm connectors.
1. E5092AU upgrade kits are available to add cable and adapter options after initial purchase. Order the corresponding item
number (E5092AU-09B or E5092AU-20B).
2. Interconnect cables are not offered for 4-port E5081A ENA-X.
Docking Plate Options
Choose option 300 for the connection of the E5080B and E5092A.
Option Number
1
Description
Additional Information
E5092A-300
Docking plate kit for the E5080B
1. E5092AU upgrade kits are available to add docking plate kit options after initial purchase. Order the corresponding item number
(E5092AU-300).
41
Accessories, Calibration Options
Option Number
Description
Additional Information
E5092A-1CM
Rack mount kit only
Adds a rack mount kit for use without handles.
E5092A-1CN
Front handle kit only
Adds a front handle kit.
E5092A-1CP
Rack mount kit with handle kit
Adds a rack mount and front handle kit.
E5092A-1A7
ISO 17025 compliant calibration
E5092A-A6J
ANSI Z540 compliant calibration
Measurement Accessories
A complete list of RF and microwave test accessories is available on our Web site:
www.keysight.com/find/mta
Accessories are available in these connector types: 50 Ω Type-N, 3.5 mm, 7 mm, 2.4 mm, 2.92 mm,
1.85 mm, 1.0 mm, and waveguide. Test port cables and a calibration kit should be added for a complete
measurement system. A verification kit is used to verify corrected system performance.
Cable and Adapter Sets
Keysight offers cables in the following types:
•
Single cables in semi-rigid and flexible
•
Cable sets in semi-rigid and flexible
There are also adapter sets available that protect the test port and convert the port to the desired
connector interface. These kits contain:
•
One male adapter
•
One female adapter
To attain the best mechanical rigidity for device connection, use a single cable and the appropriate
special adapter set. To attain the greatest flexibility for device connection, use a cable set.
42
Cable and Adapter Sets
Coaxial measurements
Mechanical calibration kits include standards, such as opens, shorts and loads, which are measured by
the network analyzer for increased measurement accuracy.
Choose a calibration kit for each connector type to be used.
Economy, includes:
•
Open standards (male and female)
•
Short standards (male and female)
•
Fixed-termination standards (male and female)
Standard, includes the devices in the economy kit and adds:
•
Sliding load standards (male and female) or a series of offset shorts
Precision, includes the devices in the economy kit and adds:
•
50 Ω airline(s) for TRL calibration
•
TRL adapters
Electronic Calibration (ECal) kits replace mechanical calibration standards with one solid-state calibration
module that is controlled by the network analyzer via USB, to present many different impedances to the
test ports. A full two-port calibration can be performed quickly with a single connection. This technique
reduces operator errors and connector wear and abrasion.
For more information about ECal modules, refer to the technical overview 5963-3743E (N4690, 85090,
N4430, N7550, and N7560 Series).
Waveguide measurements
For waveguide measurements, Keysight offers mechanical calibration kits that include:
•
Waveguide-to-coax adapters (X, P, K, R, Q, U, V)
•
Precision waveguide section
•
Flush short circuit
•
Fixed terminations
•
Straight section