ENA-X and ENA Series Vector Network Analyzers.pdf - 第45页

45 85056D economy: DC to 50 GHz. Includes: • 00901 - 60003 2. 4 mm (m) fixed broadband load • 00902 - 60004 2. 4 mm (f) fixed broadband load • 85056 - 60005 2. 4 mm (m) to 2.4 mm (m) adapter • 85056 - 60006 2. 4 mm (f) t…

100%1 / 69
44
Electronic calibration kits
N4694D Microwave ECal: DC or 10 MHz to 67 GHz, 2-ports. Includes:
•
Option F0F: Both connectors are 1.85 mm female on module
•
Option M0F: 1 female and 1 male 1.85 mm connector on module
•
Option M0M: Both connectors are 1.85 mm male on module
•
Option 0DC: DC to 67 GHz
•
Option 100: 10 MHz to 67 GHz
•
Option 00A adds:
o
85058-60113 1.85 mm (m) to 1.85 mm (m) adapter
o
85058-60114 1.85 mm (f) to 1.85 mm (f) adapter
Cables
•
N4697J
1
Single, flexible cable up to 70 GHz:
o
1.85 mm (f) to 1.85 mm (f), 96.5 cm, 38 inches
•
N4697K
1
Set, flexible cable set up to 70 GHz
o
One 1.85 mm (f) to 1.85 mm (f) cable, 62.2 cm, 24.5 inches, and one 1.85 mm (f) to 1.85 mm (m)
cable, 62.2 cm, 24.5 inches
•
N4421B-K67 Single, flexible: 1.85 mm (f) to 1.85 mm (m), 91.4 cm, 36 inches
Adapter sets
•
85130H
1
1.85 mm to 1.85 mm
1. Special rugged female connector specifically for connecting to the network analyzer test port but does not mate with a standard
male connector.
For Devices with 2.4 mm Connectors
Mechanical calibration kits
85056A standard: DC to 50 GHz. Includes:
•
00901-60003 2.4 mm (m) fixed broadband load
•
00902-60004 2.4 mm (f) fixed broadband load
•
00915-60003 2.4 mm (m) sliding load
•
00915-60004 2.4 mm (f) sliding load
•
85056-60005 2.4 mm (m) to 2.4 mm (m) adapter
•
85056-60006 2.4 mm (f) to 2.4 mm (f) adapter
•
85056-60007 2.4 mm (m) to 2.4 mm (f) adapter
•
85056-60020 2.4 mm (m) short
•
85056-60021 2.4 mm (f) short
•
85056-60022 2.4 mm (m) open
•
85056-60023 2.4 mm (f) open
45
85056D economy: DC to 50 GHz. Includes:
•
00901-60003 2.4 mm (m) fixed broadband load
•
00902-60004 2.4 mm (f) fixed broadband load
•
85056-60005 2.4 mm (m) to 2.4 mm (m) adapter
•
85056-60006 2.4 mm (f) to 2.4 mm (f) adapter
•
85056-60007 2.4 mm (m) to 2.4 mm (f) adapter
•
85056-60020 2.4 mm (m) short
•
85056-60021 2.4 mm (f) short
•
85056-60022 2.4 mm (m) open
•
85056-60023 2.4 mm (f) open
Electronic calibration kits
N4693D Microwave ECal: DC or 10 MHz to 50 GHz, 2-ports. Includes:
•
Option F0F: Both connectors are 2.4 mm female on module
•
Option M0F: 1 female and 1 male 2.4 mm connector on module
•
Option M0M: Both connectors are 2.4 mm male on module
•
Option 0DC: DC to 50 GHz
•
Option 100: 10 MHz to 50 GHz
•
Option 00A adds:
o
85056-60005 2.4 mm (m) to 2.4 mm (m) adapter
o
85058-60006 2.4 mm (f) to 2.4 mm (f) adapter
Cables
Note: Keysight offers the following 2.4 mm test port cables. Adapters will be necessary when using these
cables for 2.92 mm measurements.
•
85133C
1
single, semi-rigid: 2.4 mm (f) to PSC-2.4 mm (f), 81 cm, 32 inches
•
85133D
1
set, semi-rigid:
o
One 2.4 mm (f) to 2.4 mm (m), 53 cm, 21 inches, p/n 85133-60001
o
One 2.4 mm (f) to 2.4 mm (f), 53 cm, 21 inches, p/n 85133-60002
•
85133E
1
single, flexible: 2.4 mm (f) to PSC-2.4 mm (f), 97 cm, 38 inches
•
85133F
1
set, flexible:
o
One 2.4 mm (f) to 2.4 mm (f), 63 cm, 25 inches, p/n 85133-60016
o
One 2.4 mm (f) to 2.4 mm (m), 63 cm, 25 inches, p/n 85133-60017
•
85133H
1
Single, flexible: 2.4 mm (f) to 2.4 mm (m), 63 cm, 25 inches
•
N4421AK20 Single, flexible: 2.4 mm (f) to 2.4 mm (m), 91.4 cm, 36 inches
46
Adapter sets
•
85130E 2.4 mm
1
to 7 mm
•
85130F 2.4 mm
1
to 3.5 mm
•
85130G 2.4 mm
1
to 2.4 mm
1. Special rugged female connector specifically for connecting to the network analyzer test port but does not mate with a standard
male connector.
For Devices with K Connectors (2.92 mm) Connectors
Mechanical calibration kits
85056KE01 DC to 40 GHz
For use with user supplied 2.92 mm test port cables. 2.92 mm (K connector) calibration kit with fixed and
sliding loads. The Keysight 85056KE01 calibration kit is an ordering convenience to allow the pass-
through ordering from Keysight for the Maury 8770E47 calibration.
85056KE02 DC to 40 GHz
For use with user supplied 2.92 mm test ports cables. 2.92 mm (K connector) calibration kit with fixed
loads only. The Keysight 85056KE02 calibration kit is an ordering convenience to allow the pass-through
ordering from Keysight for the Maury 8770F47 calibration kit.
The 85056KE01 and 85056KE02 contains one NMD 2.4 mm
1
(f) to 2.92 mm (f) and one NMD 2.4 mm
1
(f) to 2.92 mm (m) test port adapter to adapt the 2.4 mm test ports of the PNA to 2.92 mm. It also supplies
2.92 mm to 2.92 mm in-series adapters (3 adapters) and a PNA Cal Coefficients on a USB stick. Users
must supply their own 2.92 mm or K-connector test port cables. Also included is a 2.92 mm torque
wrench.
Maury Microwave Terms and Conditions for Warranty and Return apply. Maury Microwave Corp.
calibration kits are to be returned directly to Maury Microwave for service, repair, or calibration issues and
not to Keysight Technologies. For additional information go to www.maurymicrowave.com. Keysight
Technologies does not guarantee the performance of the Maury calibration kits or the system
performance when connected to Keysight vector network analyzers.
1. Special rugged female connector specifically for connecting to the network analyzer test port but does not mate with a standard
male connector.