4OM-1011-002.pdf - 第259页
Tg0860-PM-MM 10.6 HDD/FDD OPERA TION - NOZZLE TYPE DA T A INFO. Display 0307-002 3-207 10.6 HDD/FDD OPERA TION - NOZZLE TYPE DA T A INFO. Display When the [NOZZLE TYPE DA T A INFO.] key is pressed at the “HDD/FDD OPERA T…
Tg0860-PM-MM
10.5 HDD/FDD OPERATION - NOZZLE STOCKER DATA Display
0307-002 3-206
10.5 HDD/FDD OPERATION - NOZZLE STOCKER
DATA Display
When the [NOZZLE STOCKER DATA] key is pressed at the “HDD/FDD
OPERATION” display, the following display appears on the screen.
Notes: (a) This display can be opened only when the machine is in the
“STOP” mode and the nozzle stocker data is not exchanged be-
tween the machine and the programming device (option).
(b) While this display is active, the nozzle stocker data cannot be
exchanged between the machine and the programming device.
The [ZERO] and [READY] buttons also become invalid.
For the Placement Head/Nozzle Data, when the nozzle has been
mounted on the head, the data can not be read from the FD to the
machine.
Refer to “10.3 HDD/FDD OPERATION - OFFSET DATA Display of Section
3” for the detailed information on how to save, load, or delete the nozzle stocker
data.
Fig. 4C354
Tg0860-PM-MM
10.6 HDD/FDD OPERATION - NOZZLE TYPE DATA INFO. Display
0307-002 3-207
10.6 HDD/FDD OPERATION - NOZZLE TYPE DATA
INFO. Display
When the [NOZZLE TYPE DATA INFO.] key is pressed at the “HDD/FDD
OPERATION” display, the following display appears on the screen.
Notes: (a) This display can be opened only when the machine is in the
“STOP” mode and the nozzle type data is not exchanged between
the machine and the programming device (option).
(b) While this display is active, the nozzle type data cannot be ex-
changed between the machine and the programming device.
The [ZERO] and [READY] buttons also become invalid.
Refer to “10.3 HDD/FDD OPERATION - OFFSET DATA of
Section 3” for detailed information on how to save, load, or de-
lete the nozzle type data.
(c) Another display cannot be opened from this display during save
and load operation.
Save Operation (Machine
→→
→→
→
FD)
(1) Insert a DOS-formatted floppy disk (1.44 MB) into the FDD (floppy
disk drive).
(2) Move the line cursor (“MACHINE” side) to the nozzle type data name
to be saved.
(3) When nozzle type data having the same name is found in the floppy
disk, whether or not the exiting data should be replaced with the one
is to be selected. (Select it by pressing the [OVERWRITE DATA] or
[DISABLE OVERWRITE] key and changing the indication).
(4) Press the [SAVE ] key.
“SAVING” appears in the “STATUS” text box, indicating that the
selected nozzle type data is being saved.
• When the data is saved normally, “SAVED” appears in the text box
and the saved nozzle type data name appears on the “FD” side.
• When an error is found during save operation, an error message is
issued and the save operation is interrupted.
Note: When a file in the floppy disk (a program file created on the
programming device side) keeps the data to be used exclu-
sively for another machine and is replaced with the new one,
it cannot be used for another machine.
To keep the exclusive data stored in memory, follow the data
replacement procedure through data communication with the
programming device.
Fig. 4C355
Tg0860-PM-MM
10.6 HDD/FDD OPERATION - NOZZLE TYPE DATA INFO. Display
0305-001 3-208
Load Operation (FD
→→
→→
→
Machine)
(1) Insert a floppy disk (a disk where the nozzle type data is saved) into
the FDD (floppy disk drive).
(2) Press the [FD] key. The nozzle type names are displayed.
Note: Data other than the nozzle type is not displayed.
(3) Move the line cursor on the “FD” side to the nozzle type data name to
be loaded.
(4) When the nozzle type data having the same name is found in the ma-
chine, whether or not the exiting data should be replaced with the
new one is to be selected. (Select it by pressing the [OVERWRITE
DATA] key and changing the indication).
(5) Press the [LOAD ] key.
“LOADING” appears in the “STATUS” text box, indicating that the
data is being loaded.
• When the data is loaded normally, “LOADED” appears in the text
box and the loaded nozzle type name appears on the machine side.
• When an error is found during load operation, an error message is
issued and the load operation is interrupted.
Notes: (a) When the loaded pattern progrma data contains some
component IDs which do not exist in the component li-
brary data on the machine side, it is required to load such
IDs from the programming device.
(b) Pattern Program Memory Capacity
Maximum Number of Steps: 5,000 steps/model
Maximum Memorized Number of Steps: 7,600 steps
Maximum Memorized Number of Models: 24 models
How to Delete the Nozzle Type Data on “FD” Side
(1) Insert a floppy disk into FDD.
(2) Press the [FD] key. The nozzle type names are displayed.
(3) Move the line cursor (“FD” side) to the nozzle type name to be de-
leted and press the [PRGM. DEL.] key.
The [DELETE] key appears at A in Fig. 4C356.
(4) When the [DELETE] key is pressed, the delete operation starts.
After the delete operation is completed, the nozzle type names in the
floppy disk are displayed again.
• Data other than the nozzle type is not displayed.
• When an unformatted floppy disk is inserted into FDD and the
save operation is performed, an error message is issued.
Fig. 4C356
A