4OM-1011-002.pdf - 第71页
0305-001 Tg0860-PM-MM (CURRENT DA T A) [SCREENS] Key Fig. 4C24 [SA VED/CURRENT] Key Saved Data Fig. 4C25 3-20 3.2 Component Handling Error Rate Data
0305-001 Tg0860-PM-MM
3.2.1 Feeder Message Rate
Pick-up rates managed for each feeder (feeder slot No.) are displayed accord-
ing to the parameters specified at the “AUTO OPERATION SET-UP” display.
When the [FEEDER MESSAGE RATE] key is pressed at the “COMP. HAN-
DLING ERROR RATE DATA” display, the following display appears on the
screen.
When the [SAVED/CURRENT] key or the [SCREENS] key is pressed, an-
other display is selected.
Note: The -marked items are optional.
(SAVED DATA)
Fig. 4C22
Fig. 4C23
3-19
3.2 Component Handling Error Rate Data
[SAVED/CURRENT] Key
Current Data
[SCREENS] Key
0305-001 Tg0860-PM-MM
(CURRENT DATA)
[SCREENS] Key
Fig. 4C24
[SAVED/CURRENT] Key
Saved Data
Fig. 4C25
3-20
3.2 Component Handling Error Rate Data
0305-001 Tg0860-PM-MM
• When one of the data keys is pressed, the feeder No. with the biggest param-
eter under the selected data key is displayed in the first line and feeder Nos.
having the subsequent (second, third, fourth, ...) biggest parameters follow.
When the [FDR. NO.] key is pressed, feeder Nos. are arranged in their ini-
tial order.
• When the [CRG. SEL.] key is pressed, the display for the corresponding
feeder carriage appears on the screen.
• Parameters set at the “AUTO OPERATION SET-UP (02/03)” display are
displayed after the label “MANAGEMENT DATA FDR. MESSAGE RATE”.
“Saved Data” : Shown are the parameters calculated just before the cur-
rent parameters.
“Current Data” : Shown are the parameters being calculated at present.
Examples in Figs. 4C22, 4C23, 4C24 and 4C25 :
MANAGEMENT DATA FDR. MESSAGE RATE 10/100: Numerator 10 shows
the number of pick-up errors detected before 100 components are picked up.
Denominator 100 shows that 100 components are to be picked up. When 10
pick-up errors are detected, a message appears in the “MGT. INFO.” text box,
indicating that the pick-up rate has deteriorated. When the number of pick-up
errors does not reach “10” after 100 components are picked up, XX/XX is
reset to “00/00” and counting starts again.
The “FEEDER MESSAGE RATE (SAVED DATA)” shows the parameters
just before this delimiter.
• When an alarm is issued, the blue feeder No. turns red at the “FEEDER
MESSAGE RATE (SAVED DATA)” display.
3-21
3.2 Component Handling Error Rate Data