00195779-0102_UM_D4_SR605_EN.pdf - 第17页
User manual SIPLACE D4 1 Introduction From software version SR.605.xx 07/2008 EN Edition 1.1 Machine description 17 1.1.4 Serial number of the machine The serial number of the machine is pu nched in t he rating plate (se…
1 Introduction User manual SIPLACE D4
1.1 Machine description From software version SR.605.xx 07/2008 EN Edition
16
– 0201 package
We can supply the 0201 package for processing 0201 components with the 12-segment Col-
lect&Place head. 1
– Splice detection for tape feeder modules
Splice detection for tape feeder modules can be retrofitted on the machine.
User manual SIPLACE D4 1 Introduction
From software version SR.605.xx 07/2008 EN Edition 1.1 Machine description
17
1.1.4 Serial number of the machine
The serial number of the machine is punched in the rating plate (see item 1). The rating plate is
fixed to the outside of location 1 (see item 2).
1
Fig. 1.1 - 2 Serial number of the machine
(1) Rating plate
(2) Position of the rating plate on the machine
1 Introduction User manual SIPLACE D4
1.1 Machine description From software version SR.605.xx 07/2008 EN Edition
18
1.1.5 EU Declaration of Conformity
The product/device described below 1
Product: Placement machine
Type: SIPLACE D4
Item no.: 00119880 1
manufactured by
SIPLACE
Electronics Assembly Systems
Rupert-Mayer-Str. 44
81379 München 1
conforms to the regulations and standards listed in the EU Declaration of Conformity provided.
1.1.6 Use as prescribed
The product must only be used for its intended purposes as described in the catalogs and techni-
cal descriptions, namely the placement of SMD components, and only with the third-party equip-
ment and components recommended or permitted by SIPLACE. Use for a different or
extended purpose is not prescribed.
If the product is not used as prescribed, SIPLACE Company accepts no liability for any damage
that may occur and does not guarantee that the components will work properly and without prob-
lems.
Use as prescribed also includes compliance with all the instructions in the user manual.
For the product to operate correctly and reliably, it must have been transported, stored, erected
and assembled correctly and must be operated and maintained with care.
1.1.7 Failure to use the product as prescribed
Failure to use the product as prescribed can result in both danger to life and limb and material
damage. For this reason any use that is not prescribed is not allowed. If the product is not used
as prescribed, SIPLACE Company accepts no liability for any damage that may occur and does
not guarantee that the components will work properly and without problems.
Use of the machine other than as prescribed includes, for example
– operation of the placement machine with safety equipment deactivated or removed.
– placement of components that do not meet the permitted specification.
– use of component feeder modules that have not been approved.
– use of unauthorized accessories and additional modules.