00195779-0102_UM_D4_SR605_EN.pdf - 第221页
User manual SIPLACE D4 6 Station extensions From software version SR.605.xx 07/2008 EN Edition 6.1 Nozzle changer for the 12-nozzle Collect & Place head 221 6 S t ation extensions 6.1 Nozzle changer fo r the 12-nozzl…
5 Tasks for the operating personnel User manual SIPLACE D4
5.10 Docking the component trolley in or out From software version SR.605.xx 07/2008 EN Edition
220
→ Press the start button to start the machine.
→ Push the sleeve (item 1 in Fig. 5.10 - 3
, page 220) up using both handles and swivel the han-
dle down (item 2 in Fig. 5.10 - 3
, page 220).
5
Fig. 5.10 - 3 Component trolley - swivel handles down
(1) Push sleeve up
(2) Fold handle down
User manual SIPLACE D4 6 Station extensions
From software version SR.605.xx 07/2008 EN Edition 6.1 Nozzle changer for the 12-nozzle Collect&Place head
221
6 Station extensions
6.1 Nozzle changer for the 12-nozzle Collect&Place
head
Item no. 00119888-xx Nozzle changer, 12-segment C&P head, set
Item no. 00119161-xx Nozzle changer, 12-segment C&P head, 1x
Nozzle changers can greatly increase the flexibility of the placement heads for processing differ-
ent types of component. If the placement program requires a nozzle change, then the placement
head automatically returns the old nozzle to the nozzle holder and picks up the new nozzle. Noz-
zles that were separated out during the vacuum check can also be quickly changed.
It is significantly more exact and faster to pick up nozzles from a nozzle changer than would be
possible manually. When placing small components, it is essential to minimize the radial eccen-
tricity during nozzle rotation.
6
Fig. 6.1 - 1 Nozzle changer for the 12-segment Collect&Place head
6 Station extensions User manual SIPLACE D4
6.1 Nozzle changer for the 12-nozzle Collect&Place head From software version SR.605.xx 07/2008 EN Edition
222
6.1.1 Description
This nozzle changer can hold up to 5 magazines, each with 12 nozzle holders. The magazines
are seated on a common carrier (see Fig. 6.1 - 1
, page 221). They are centered using two parallel
pins and fixed in place with clips.
A second nozzle changer can be optionally installed at each location (see item 6 in Fig. 6.1 - 2
,
page 223
).
6.1.2 Technical data
6
Nozzle changer for the 12-nozzle Collect&Place head
Dimensions (length x width x height) 472.5 x 63 x 77 mm³
Number of magazines 5, each with 12 nozzle holders
Nozzle types 9xx
Nozzle changeover time approx. 2s per nozzle
Compressed air connection 0.48 MPa (4.8 bar)