00195779-0102_UM_D4_SR605_EN.pdf - 第217页
User manual SIPLACE D4 5 Tasks for the operating personnel From software version SR.605.xx 07/2008 EN Edition 5.10 Docking the component trolley in or out 217 Fig. 5.10 - 1 Docking the component trolley in or out 5 (1) B…
5 Tasks for the operating personnel User manual SIPLACE D4
5.10 Docking the component trolley in or out From software version SR.605.xx 07/2008 EN Edition
216
5.10 Docking the component trolley in or out
WARNING 5
→ Please follow the safety instructions for docking the component trolley in and out described
in Section 2.5.2, page 52.
5.10.1 Docking out the component trolley
→ Click on the STOP PROCESSING PCB icon in the MAIN VIEW menu.
The PCB in progress will be completed. The icons of the single functions menu will then be
activated. 5
→ Click on the desired icon SINGLE FUNCTIONS GANTRY.
→ Select GANTRY FUNCTIONS.
→ From this menu, click on the GO TO SET-UP POSITION button.
All the placement heads will move across the PCB conveyor to prevent them being damaged
when the component trolley is changed. 5
→ Open the protective cover of the selected gantry.
→ Open the cover over the button for the lifting mechanism for the component table bed (see
Fig. 5.10 - 1
, item 1, page 217).
WARNING DANGER OF CRUSHING 5
When raising the component table bed, never reach into the gap between the feeders and
the used tape channel. 5
→ Turn the switch on the component table (item 4 in Fig. 5.10 - 1
, page 217) up.
→ Press the button until the component table bed (item 8 in Fig. 5.10 - 1
, page 217) has reached
the upper final position.
→ Unplug the supply cable of the component trolley from the socket on the station (item 2 in Fig.
5.10 - 1
, page 217).
→ Swivel the two handles up (item 1 in Fig. 5.10 - 2
, page 218).
User manual SIPLACE D4 5 Tasks for the operating personnel
From software version SR.605.xx 07/2008 EN Edition 5.10 Docking the component trolley in or out
217
Fig. 5.10 - 1 Docking the component trolley in or out
5
(1) Button for raising the component table bed (beneath the cover flap)
(2) Plug for connecting the component trolley cable
(3) Component table bed, can be raised or lowered
(4) Button for lowering the component table bed
(5) CO trolley handle
(6) Centering hole for the centering pins
(7) Supporting surface for the component table bed (right and left)
(8) Centering pin for the component table bed
5 Tasks for the operating personnel User manual SIPLACE D4
5.10 Docking the component trolley in or out From software version SR.605.xx 07/2008 EN Edition
218
5
Fig. 5.10 - 2 Component trolley - swivel handles up to push
5
(1) Handle
(2) Button for lowering the component table
→ With both hands on the handles, pull the component trolley out of the machine.
→ Turn the switch on the component table (item 4 in Fig. 5.10 - 2
) down. The component table
is lowered.
WARNING 5
→ Please follow the safety instructions for moving the component trolley described in Section
2.5.4, page 53.