00195779-0102_UM_D4_SR605_EN.pdf - 第57页

User manual SIPLACE D4 2 Operational safety From software version SR.605.xx 07/2008 EN Edition 2.5 Safety instructions for operating the machine 57 2.5.8 Safety instructions for th e t ape cutter 2 Fig. 2.5 - 5 Safety in…

100%1 / 266
2 Operational safety User manual SIPLACE D4
2.5 Safety instructions for operating the machine From software version SR.605.xx 07/2008 EN Edition
56
2.5.7 Safety instructions for removing nozzles from Collect&Place heads
CAUTION
RISK OF INJURY TO FINGERS BY SHARP NOZZLES 2
Do not remove the nozzles in the pick-up/placement position (item 2).
The procedure for removing nozzles manually from the sleeve is as follows:
→ Pace the sleeve from which the nozzle is to be removed to the removal point (item 1).
→ Remove the nozzle from the sleeve here.
2
Fig. 2.5 - 4 Position of the sleeve during a manual nozzle change
(1) Removal position for sleeves and nozzles
(2) Pick-up and placement position
User manual SIPLACE D4 2 Operational safety
From software version SR.605.xx 07/2008 EN Edition 2.5 Safety instructions for operating the machine
57
2.5.8 Safety instructions for the tape cutter
2
Fig. 2.5 - 5 Safety instructions for the tape cutter
WARNING RISK OF CUTTING! 2
→ Never reach down into the used tape channel (item 1) from above with bare hands, even if
the machine is switched off.
→ Similarly, even when the machine is switched off, do not reach up from below with bare hands
into the ejection opening of the tape cutter (item 2), e.g. to remove waste used tape.
→ To remove waste used tape, it is essential to switch the machine off first and put on very sub-
stantial protective gloves, as the tape cutter bars are extremely sharp.
2 Operational safety User manual SIPLACE D4
2.6 Safety equipment From software version SR.605.xx 07/2008 EN Edition
58
2.6 Safety equipment
2.6.1 Protective covers
2
Fig. 2.6 - 1 Protective covers
(1) Protective covers
(2) Safety panels
(3) Cover flap on the input belt
(4) Hand guard on the input belt
(5) Cover flap on the output belt
(6) Hand guard on the output belt