00195779-0102_UM_D4_SR605_EN.pdf - 第19页

User manual SIPLACE D4 1 Introduction From software version SR.605.xx 07/2008 EN Edition 1.1 Machine description 19 – u se of the placement machine by unqualified pe rsonnel. – o peration of the placement machine with ou…

1 Introduction User manual SIPLACE D4

1.1 Machine description From software version SR.605.xx 07/2008 EN Edition

1.1.5 EU Declaration of Conformity

The product/device described below 1

Product: Placement machine

Type: SIPLACE D4

Item no.: 00119880 1

manufactured by

SIPLACE

Electronics Assembly Systems

Rupert-Mayer-Str. 44

81379 München 1

conforms to the regulations and standards listed in the EU Declaration of Conformity provided.

1.1.6 Use as prescribed

The product must only be used for its intended purposes as described in the catalogs and techni-

cal descriptions, namely the placement of SMD components, and only with the third-party equip-

ment and components recommended or permitted by SIPLACE. Use for a different or

extended purpose is not prescribed.

If the product is not used as prescribed, SIPLACE Company accepts no liability for any damage

that may occur and does not guarantee that the components will work properly and without prob-

lems.

Use as prescribed also includes compliance with all the instructions in the user manual.

For the product to operate correctly and reliably, it must have been transported, stored, erected

and assembled correctly and must be operated and maintained with care.

1.1.7 Failure to use the product as prescribed

Failure to use the product as prescribed can result in both danger to life and limb and material

damage. For this reason any use that is not prescribed is not allowed. If the product is not used

as prescribed, SIPLACE Company accepts no liability for any damage that may occur and does

not guarantee that the components will work properly and without problems.

Use of the machine other than as prescribed includes, for example

– operation of the placement machine with safety equipment deactivated or removed.

– placement of components that do not meet the permitted specification.

– use of component feeder modules that have not been approved.

– use of unauthorized accessories and additional modules.

User manual SIPLACE D4 1 Introduction

From software version SR.605.xx 07/2008 EN Edition 1.1 Machine description

– use of the placement machine by unqualified personnel.

– operation of the placement machine without a guard ("dummy feeder") if not every location

contains a feeder.

– unclear allocation of electrical connecting cables to each machine and the installed options.

– if there are two or more people standing at a component trolley location at the same time dur-

ing the retrofit.

1.1.8 Noise emissions

1.1.9 Important notes on environmentally-friendly disposal of materials

and components

SIPLACE systems are manufactured using only materials and parts that can be easily separated

and disposed of in an environmentally-friendly way.

PLEASE NOTE 1

The owner of the system has sole responsibility for the proper environmentally-friendly disposal

of machines, working materials, consumables and wear parts.

→ Please observe your national statutory provisions for waste disposal and environmental pro-

tection.

1.1.10 Electromagnetic compatibility (EMC)

SIPLACE placement machines are designed and tested for professional use in industrial applica-

tions. Electromagnetic compatibility in terms of the emission of interference cannot be guaranteed

in any other environment.

1.1.11 Note on the original SIPLACE accessories

→ Only use SIPLACE original spare parts and authorized accessories. The use of other parts

will affect safety and will invalidate the liability for any consequential damage.

Maximum noise emissions 74 dB (A)

1 Introduction User manual SIPLACE D4

1.2 Line concept From software version SR.605.xx 07/2008 EN Edition

1.2 Line concept

1.2.1 Description of the recommended line concept

The SIPLACE concept is characterized by its flexibility, modularity, compactness and high power

density. It allows a production line to be individually configured from identical and different mod-

ules. If the production requirements change, the individual placement systems are so compact

that they can be recombined quickly and easily.

Fig. 1.2 - 1 Sample line concept

The SIPLACE family has exactly the right placement system, whatever the output requirements:

SIPLACE D-series machines can be used to place IC, flip-chip, bare die and exotic components

(OSC). They cover the spectrum of components from 01005 to 85 x 85 / 125 x 10 mm² with a very

high placement rate.