OPERATING MANAUAL(FOR ENGINEERS).pdf - 第110页
Page 5-14 5-4 T eaching the Chip Recognition 5-4-1 Chip Recognition This equipment catches chips by pickup with nozzle, pickup position and angle of chip varies for each time. Recognition is carried out to correct pickup…
Page 5-13
TEACHING
5
Teaching Bad Mark Recognition
16. Press
UNLOCK
and Recog test .
• Check that the recognition is properly carried
out.
17. Press .
18. Press Yes .
• The board is carried out and teaching is
finished.
• Production data teaching screen reappears.
3Y3C-E-EMD05-A01-00
1
2
3Y3C-EEn-DmPtBm-004
Page 5-14
5-4 Teaching the Chip Recognition
5-4-1 Chip Recognition
This equipment catches chips by pickup with nozzle, pickup position and angle of chip varies for
each time. Recognition is carried out to correct pickup position and angle deviation.
5-4-2 Flow Chart of Teaching the Chip Recognition
Start teaching
Pickup chip
Correct pickup position
Recognition
Estimate recognition
End of teaching
3Y3C-E-EMD05-A01-00
Page 5-15
TEACHING
5
Teaching the Chip Recognition
When chip recognition is required
When following troubles occur, check teaching the chip recognition.
Case 1. At specified unit during produc-
tion, a recognition error occurs.
Case 2. By recognition fault information in
reference production report, many
errors occur at specified unit.
3Y3C-E-EMD05-A01-01