OPERATING MANAUAL(FOR ENGINEERS).pdf - 第33页
Page 33 HOW T O SEE DESCRIPTION FOR OPERA TION The description depends on each page, but basic structure is as follows. 1-1-1 Starting Production 1. Press Production . •“ Return to origin ” for all axes are carried out. …
Page 32
3Y3C-E-EMD00-A04-01
PRECAUTIONS FOR USE
How to stop the vacuum pump motor
NOTICE
Vacuum pump motor don’t stop by emergency switch and cover switch.
Only stop by main switch.
4W3C-AD00
Vacuum pump
Page 33
HOW TO SEE DESCRIPTION FOR OPERATION
The description depends on each page, but basic structure is as follows.
1-1-1 Starting Production
1. Press
Production
.
•“Return to origin” for all axes are carried out.
MARKS USED IN THIS MANUAL
In this manual, the following marks are used for description.
3Y3C-E-EMD00-A04-01
Title
Title
Actual operation
Actual operation
Supplementary description on operation
Supplementary description on operation
Operating procedure number
Operating procedure number
: These show operation flow.
: These show operation (cause) and
effect.
: This shows referential item.
: This shows engineer’s operation.
: This shows pressing a key on
touch panel.
: This means pressing
UNLOCK
and then
START
on operating panel within 2
seconds.
: This means pressing B key while
holding A key.
UNLOCK
START
A B
+
Engineer
Run
Page 34
3Y3C-E-EMD00-A04-01
HOW TO SEE DESCRIPTION FOR OPERATION
NOTICE
This manual is created for CM88S-M, CM88S-M1, CM88C-D, and CM88S-MU in
common. Then the screen of illustration of CM88S-M is mainly used in this.
CM88S-M
• The board is available up to the size M.
(“Specifications for Corresponding Board” in
OPERATING MANUAL For Engineers.)
• The maximum of 70 feeders (sum of them is
140) can be set to each stage.
CM88S-M1
• The board is available up to the size M.
(“Specifications for Corresponding Board” in
OPERATING MANUAL For Engineers.)
• The maximum of 35 feeders (sum of them is
70) can be set to each stage.
4G3C-AA01
3Y3C-AG01
3Y3C-153E
B stage
A stage
3Y3C-152E
B stage A stage
303C-AA00
303C-AB01